Bedienungsanleitung Quadra-Fire Classic Bay 1200 Pellet (Seite 20 von 40) (Englisch)

815524

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

20 7027-802M 04/23

Figure 20.1

Clean Out

Cover

NOTE: There are heavy duty vacuum cleaners specically

designed for solid fuel appliance cleaning.

12. Door Latch Inspection

• Frequency: Prior to heating season

• By: Homeowner

a. Be sure the appliance is allowed to cool, has been

unplugged and the exhaust blower is o󰀨.

b. To adjust, open the latch and pivot the holding rod

out. Loosen the jam nut on the rod.

c. With a Phillips head screw driver, turn the rod

clockwise to tighten. The latch handle should snap

securely in place when adjusted properly.

d. After adjusting the latch, be sure to tighten the jam

nut on the rod to hold the adjustment.

13. Cleaning Exhaust Blower - Requires No Lubrication

• Frequency: Yearly or as needed

• By: Qualied Service Technician

• Task: Contact your local dealer

14. Cleaning Convection Blower - Requires

No Lubrication

• Frequency: Yearly or as needed

• By: Qualied Service Technician

• Task: Contact your local dealer.

15. Cleaning the Top Vent Adapter

a. The appliance must be in complete shutdown

and the exhaust blower should be o󰀨. Allow the

appliance to completely cool down.

b. Open the clean-out cover (Figure 20.1).

c. Sweep out any ash build-up.

10. Soot and Fly Ash: Formation & Need for Removal

in Exhaust Venting System.

• Frequency: Yearly or more frequently depending on

ash build-up.

• By: Qualied Service Technician/Homeowner

Be sure the appliance is allowed to cool, has been unplugged

and the exhaust blower is o󰀨.

The products of combustion will contain small particles of y

ash. The y ash will collect in the exhaust venting system

and restrict the ow of the ue gases.

At start-up if there is incomplete combustion, or if there is

a shutdown or incorrect operation of the appliance it will

lead to some soot formation. This will collect in the exhaust

venting system.

The venting system may need to be cleaned at least once a

year or more often depending upon the quality of your fuel

or if there is a lot of horizontal pipe sections. Ash will build

up more quickly in the horizontal sections.

11. Cleaning the Glass

• Frequency: When clear view of the re pot

becomes obscure

• By: Homeowner

a. Appliance must be completely cool before

cleaning glass.

b. Vacuum y ash from glass and door rope.

c. Use a damp paper towel or any non-abrasive glass

cleaner. Wipe o󰀨 with dry towel.

Handle glass assembly with care.

When cleaning glass:

• Avoid striking, scratching or slamming glass.

• Do NOT clean glass when hot.

• Do NOT use abrasive cleaners.

• Use a hard water deposit glass cleaner on

white lm.

• Refer to maintenance instructions.

CAUTION

Handle glass doors with care.

• Inspect the gasket to ensure it

is undamaged.

• Do NOT strike, slam or scratch glass.

• Do NOT operate appliance with glass door

removed, cracked, broken or scratched.

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadra-Fire Classic Bay 1200 Pellet Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Quadra-Fire Classic Bay 1200 Pellet

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info