Bedienungsanleitung Quadral Aurum P8 (Seite 9 von 15) (Deutsch, Englisch)

698708

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

• Never use the equipment in the vicinity of water, in humid areas or outdoors. Mois-

ture can bypass the electrical insulation and this will create a life-threatening risk

as is the case with all equipment that has not been specially designed against

the penetration of moisture.

• Protect the equipment against water being sprayed on it. You must also ensure

that no vessels containing liquid (e.g. vases) are placed on top of the equipment.

• Do not place the equipment in the vicinity of a heat source such as an electric

fire, radiator, oven or similar.

• The slits and openings in the enclosure provide the ventilation and ensure reliable

operation. They must never be misaligned or covered.

• Burning-out of specific components cannot be completely excluded, despite the

use of protective devices, if the equipment is severely overloaded by continually

using very loud sound levels. A fire might also be caused inside the equipment in

theory, as a result of this type of overloading. Therefore the amplifier should always

be used within its limits and it should not be left unattended.

• Only our technical service should undertake the maintenance of your equip-

ment. Maintenance will be necessary if any type of damage occurs, i.e. if the

power cables or plugs are damaged, if an object falls on the equipment, if the

equipment is dropped or if liquid seeps into it. Never open the equipment as you

might touch the mains voltage (230V / 115V), which is dangerous.

• Only use furniture and other units for attaching and putting the equipment on

that can be obtained from or are recommended by the manufacturer. You must

ensure that moveable tabletop units or shelves on which the equipment will be

placed are always moved very carefully in order to prevent damage or injuries

from being caused if the equipment tips over.

• Continuously loud volume can damage your hearing!

• Only use a dry, soft cloth to clean your equipment.

• Keep the packing for possible transportation use later on and keep the plastic

bag well away from children, due to the risk of asphyxiation.

Control elements on the P8 front panel

1 Volume control (Volume): With this rotary control is used to set the volume. The

settings are changed in 1dB increments and are shown in the display.

2 Infrared Receiver: This sensor receives the infrared signals of your remote control.

Always point the remote control at this area, and make sure that the sensor is not

covered up.

3 Display: Here, pieces of status information are displayed that facilitate the

handling of the amplifier.

4 Input Selection (Source / Menu): You may choose the source here by turning

the button left or right. The current source is shown in the display. By pressing the

button, you may access the menus. (Balance/Bass/Levels/SIS/HP). One rotation

of the button within the respective menu item changes the setting.

5 On/Off Button: Press this button to turn the P8 on. Press this button again to turn

the device off (standby). In standby operation, all of the settings remain saved.

6 Operating Display: This display will light up blue if the device is in standby mode

and thus signalizes that you may turn the device back on at any time by pressing

button (2) on the remote control.

Note:

The SIS function serves the purpose of automatically switching off the device

after approx. 15 minutes in case the device does not receive any signal. (Default

setting = Off) If the SIS function is activated on the P8 pre-amplifier and there is a

LINK connection to the M8, then the M8 power amplifier is also switched off.

If there is a LINK connection between P8 and M8, pressing button 5 on the pre-

amplifier, the M8 power amplifier is switched on or off as well.

41 5 62 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quadral Aurum P8 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info