Bedienungsanleitung Quickie HeliX 2 (Seite 16 von 188) (Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

713890

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

ENGLISH

16 HeliX

Options - Backrest

ADJUSTABLE BACKREST

ANGLE

The angle of the backrest can

be set to 6 different positions

(-5° forwards, 0°, 5°, 10°, 15°

and 20° backwards). To adjust

the angle, remove the screw

(1), set the desired angle and

then re-tighten the screw.

(Fig. 26).

By releasing the clamp lever

(1) the backrest height can be

innitely adjusted from 35 – 50

cm.

FOLDING BACKREST

To flip the backrest up:

To flip the backrest up push the

handles upwards and forwards,

until they click into place.

WARNING!

Keep fingers and other

objects away from the

folding mechanism

when you are folding the

backrest, to avoid

injuries or damage.

Folding the backrest down:

The backrest can be folded

down to make it easier to

transport the wheelchair.

CAUTION!

Do not do this when any load is

applied, as otherwise the lever

could break.

To fold the backrest down, push

the two small levers

(Fig. 27 + 28) on both sides of

the backrest.

RECLINING BACKREST

ANGLE

(7° - 30°)

By pulling both levers together

(1), you can release the

backrest and then move it to

the desired position.

On releasing the two levers (1)

the backrest will automatically

lock into place (Fig. 29).

WARNING!

The reclining backrest can only be used in conjunction with the

wheelbase extension.

WARNING!

It is recommended that the reclining backrest is used in conjunction

with anti-tip tubes (maximum ground clearance 3 - 5 cm).

WARNING!

We recommend that the reclining backrest is used in conjunction

with a stabilising bar.

Fig. 27

Fig. 28

Fig. 26

Fig. 29

ADJUSTABLE BACK

SLING

The adjustable back-sling

can be adjusted for tension

by using several straps.

(Fig. 30).

CAUTION!

Do not pull the tension belt too

tight, otherwise this could

interfere with the folding

mechanism for the chair.

Fig. 30

Options – Comfort back

COMFORT BACK

The comfort back permits

comfortable long seating with

lateral support and is height,

depth and angle adjustable.

To remove, push each release

lever (1) forward to unlock.

Once both levers are in the

forward position, simply lift the

back straight up.

To re-attach the back, simply

line up the pins to the receivers

and push into place. If properly

inserted the pins will “click” to a

locked position.

The two locking pins which,

when secured, prevent the

back from being released from

the chair. To lock, insert the

pins into the mounting

receivers. Simply remove the

pins if the quick-release

capability is desired,

(Fig. 31-32).

TRUNK SUPPORT

The trunk support can be

adjusted in angle, depth and

height. It can be swing away

by lifting it upwards, (Fig. 33).

DEPTH ADJUSTMENT:

Remove the 2 screws and fit

the trunk support in the new

position. Finally tighten screws

again.

ANGLE ADJUSTMENT:

Open screw, set the trunk

support into the desired angle and tighten the screw again.

HEIGHT ADJUSTMENT:

Remove the fixing screws of the bracket and move the bracket into

the desired position. Finally tighten the screws again.

Options – Trunk support

Fig. 31

Fig. 33

Fig. 32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Quickie HeliX 2 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info