Bedienungsanleitung Radiant TH52Z (Seite 5 von 5) (Englisch)

599858

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Guidance and manufacturer’s declaration – electromagnetic immunity

The TH5xy series is intended for use in the electromagnetic environment specified below. The customer or the user of the TH5xy series should

assure that it is used in such an environment.

Immunity test IEC 60601 test level Compliance level Electromagnetic environment – guidance

Electrostatic

discharge (ESD)

IEC 61000-4-2

6 kV contact

8 kV air

6 kV contact

8 kV air

Floors should be wood, concrete or ceramic tile. If floors are

covered with synthetic material, the relative humidity should be at

least 30 %.

Electrical fast

transient/burst

IEC 61000-4-4

2 kV for power supply lines

1 kV for input/output lines

Not applicable

Mains power quality should be that of a typical commercial

or hospital environment.

Surge

IEC 61000-4-5

1 kV line(s) to line(s)

2 kV line(s) to earth

Not applicable

Mains power quality should be that of a typical commercial

or hospital environment.

interruptions and

voltage variations

on power supply

input lines

IEC 61000-4-11

<5 % UT

(>95 % dip in UT)

for 0,5 cycle

40 % UT

(60 % dip in UT)

for 5 cycles

70 % UT

(30 % dip in UT)

for 25 cycles

<5 % UT

(>95 % dip in UT)

for 5 sec

Not applicable

Mains power quality should be that of a typical commercial

or hospital environment. If the user of the TH5xy series

requires continued operation during power mains

interruptions, it is recommended that the TH5xy series be

powered from an uninterruptible power supply or a battery.

Power frequency

(50/60 Hz)

magnetic field

IEC 61000-4-8

3 A/m 3 A/m

Power frequency magnetic fields should be at levels

characteristic of a typical location in a typical commercial or

hospital environment.

NOTE UT is the a.c. mains voltage prior to application of the test level.

Recommended separation distances between

portable and mobile RF communications equipment and the ME EQUIPMENT or ME SYSTEM

The TH5xy series is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the

user of the TH5xy series can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and the TH5xy series as recommended below, according to the maximum output power of the

communications equipment.

Separation distance according to frequency of transmitter

Rated maximum output power

of transmitter

150 kHz to 80 MHz

d = 1,2

80 MHz to 800 MHz

d = 1,2

800 MHz to 2,5 GHz

d = 2,3

0,01 0,12 0,12 0,23

0,1 0,38 0,38 0,73

1 1,2 1,2 2,3

10 3,8 3,8 7,3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated

using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)

according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,

objects and people.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Radiant TH52Z Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info