Bedienungsanleitung RadioShack PRO-2018 - 200 Channel (Seite 17 von 36) (Englisch)

570007

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Searching the One Touch Banks

1. To store the displayed frequency in the lowest available

channel in the assigned channel-storage banks, press

ENT

when you find a frequency. The channel number

flashes.

2. Press

ENT

again to store the frequency. The channel

and frequency flash twice. If you want to cancel the

operation, press

TUNE/CLEAR

instead of

ENT

To scan the channel-storage banks, press the one touch

bank key, then

SCAN/MAN

while

<?h;%FEb_9;

<?h;%FEb_9;<?h;%FEb_9;

<?h;%FEb_9;

7?h

7?h7?h

7?h

, or

>7C

>7C>7C

>7C

appears.

If there is no empty channel at an available bank,

XýNý#<KBB

XýNý#<KBBXýNý#<KBB

XýNý#<KBB

(where

is the bank number) appears after you press

ENT

To store more frequencies, you must clear some channels.

See “Clearing a Stored Channel” on Page 19. To continue

searching after

XýNý#<KBB

XýNý#<KBBXýNý#<KBB

XýNý#<KBB

appears, press

TUNE/CLEAR

7UKPI"6WPG

You can set the scanner to search through all receivable

frequencies from a specified frequency. You can use the

scanner's delay feature while using tune.

1. Repeatedly press

SCAN/MAN

until

C7D

C7DC7D

C7D

appears.

2. Enter the desired channel number you want to use as a

starting point for the tune. Then press

SCAN/MAN

again.

3. Press

TUNE/CLEAR

to start tune.

#j#

#j##j#

#j#

appears.

4. Hold down

for about 1 second to tune up or

down.

appear and the scanner searches the

frequencies.

5. When the scanner finds an active frequency, it stops

searching and displays the frequency's number.

6. To search for another active frequency, hold down

for about 1 second.

Once you find interesting frequencies during the search,

you can store them in the scanner’s channel-storage banks.

Frequencies found during tune search are automatically

assigned to channel-storage banks 9 and 10.

1. To store the displayed frequency in the lowest available

channel in the assigned banks, press

ENT

. The channel

number flashes.

"016'"

Searching the One Touch

Banks

If you entered a frequency that is

already stored in another channel,

#ZKFB#

#ZKFB##ZKFB#

#ZKFB# (duplicate) and the lowest-

numbered channel containing the

duplicate frequency flash for about

3 seconds. If you want to store the

frequency anyway, press ENT

again. You can then delete the

frequency later. See “Clearing a

Stored Channel” on Page 19.

Using Tune

• To reverse the tuning direction

at any time, hold down

for about 1 second.

• To tune up or down the selected

band in small increments (5 or

12.5 kHz steps), repeatedly

press

• To pause tuning, press

To resume tuning, hold down

• To quickly move up or down

through the frequencies, hold

down

. The scanner

tunes through the frequencies

until you release

• If there is no empty channel,

Xý/ý'&ý#<KBB

Xý/ý'&ý#<KBBXý/ý'&ý#<KBB

Xý/ý'&ý#<KBB appears after you

press ENT. To store more

frequencies, you must clear

some channels. See “Clearing a

Stored Channel” on Page 19.

To continue tuning after

Xý/ý'&ý#

Xý/ý'&ý#Xý/ý'&ý#

Xý/ý'&ý#

<KBB

<KBB<KBB

<KBB appears, press TUNE/

CLEAR.

20-424.fm Page 17 Monday, September 9, 2002 9:44 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

RadioShack PRO-2018 - 200 Channel Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info