Bedienungsanleitung RadioShack PRO-2053 - 300 Channel (Seite 23 von 56) (Englisch)

570004

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Operation

4. Press

ENTER

to set the frequency. The

cursor moves to

ýý

If the entered fre-

quency is incorrect,

%EM8C@;ý"I<H

%EM8C@;ý"I<H%EM8C@;ý"I<H

%EM8C@;ý"I<H

briefly

appears.

5. Enter your desired higher-end frequency

and press

ENTER

6. Rotate

SQUELCH

clockwise and leave it

set to a point just after the hissing sound

stops.

7. Press

to start searching. When

the scanner finds an active frequency, it

stops searching.

Special Notes:

• You can copy and save a frequency into

a specified bank, channel, or priority

channel when the scanner finds an

active frequency. See “Using Fre-

quency Copy Function” on Page 24 to

save the frequency. The frequency copy

functions only in search banks 2, 3, 4

and 5.

• While the scanner is searching, you can

use the seek search by pressing

FUNC

then

. The display indicates

/<<Bý+*

/<<Bý+*/<<Bý+*

/<<Bý+*

the bottom line. The scanner stops at an

active frequency for five second and

restarts searching automatically. The

scanner repeats this operation.

• You can set Zeromatic on or off by

pressing

FUNC

then

. Press

FUNC

then

again to reverse the Zeromatic setting.

When you turn this feature on,

6<IFV

6<IFV6<IFV

6<IFV

D8K@:

D8K@:D8K@:

D8K@:ý

ýý

ý+*

+*+*

briefly appears then

appears

at the first digit of the second line and

the scanner stops at the correct fre-

quency. When you turn this feature off,

disappears and the scanner stops when

it detects an active signal even it is

slightly off. Zeromatic functions only in

search bank 2, 3, 4 and 5.

• There are several group banks in SR2

Police/Fire and SR4 Ham bands. You

can turn off or on the groups by pressing

the group numbers. For example to turn

off

òò

, press

• In the Air and the Limit search bands,

press

FUNC

then

to start searching

up from the lowest frequency and press

FUNC

then

to start searching down

from the highest frequency.

Manually Tuning a Frequency

You can manually set the scanner to move

through all receivable frequencies, or select

a specific frequency as a starting point.

1. Press

TUNE

01*!

01*!01*!

01*!

and the current fre-

quency appears. The scanner automati-

cally begins tuning up or down.

2. Use the number keys to enter the fre-

quency where you want the scanner to

start.

3. Press

ENTER

4. Press

to move up or down.

When the scanner finds an active fre-

quency, it stops on the frequency.

Note:

If you press

PAUSE

while tuning, the

scanner stops tuning and

ýý

ý ÷÷

÷÷÷÷

÷÷ý

ýý

ý ,ã1/!

,ã1/! ,ã1/!

,ã1/! ý

ýý

ý÷

÷÷

ap-

pears. Press

PAUSE

again, and the scanner

resumes tuning.

LISTENING TO THE WEATHER

BAND

The FCC (Federal Communications Com-

mission) has allocated channels for use by

the National Oceanic and Atmospheric Ad-

ministration (NOAA). Regulatory agencies in

other countries have also allocated channels

for use by their weather reporting authorities.

NOAA and your local weather reporting au-

thority broadcast your local forecast and re-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

RadioShack PRO-2053 - 300 Channel Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info