Bedienungsanleitung RadioShack PRO-2053 - 300 Channel (Seite 25 von 56) (Englisch)

570004

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Operation

quency. The display indicates the bank

and channel number. After about 1 sec-

ond, the frequency to be copied flashes.

3. Press

ENTER.

All the conditions such as

receiving mode and delay condition are

copied on the channel.

á?8Eý /KFI<ü

á?8Eý /KFI<üá?8Eý /KFI<ü

á?8Eý /KFI<ü

briefly appears. The scanner automati-

cally returns to search mode.

If you try to copy a frequency which is

already stored, the scanner sounds the

notice tone 3 times after you press

ENTER

LGCô=ý á?OOO

LGCô=ý á?OOOLGCô=ý á?OOO

LGCô=ý á?OOO

appears at the

bottom line. If you want to copy the

duplicate frequency anyway, press

ENTER

, or if not, press

CLEAR

to cancel.

Copying a Frequency into a

Vacant Channel in a Specified

Bank

You can copy a frequency into a vacant

channel in a specified bank when the scan-

ner stops on the frequency during search or

tune mode.

1. Press

FUNC

then

ENTER

when you find

a frequency you want to copy.

â8EBé

â8EBéâ8EBé

â8EBé

/K/K

/KFI<å

FI<åFI<å

FI<å

appears.

2. If you want to copy the frequency into

bank 9, press

ENTER

. It is stored in the

first available vacant channel in the

bank. Or, press your desired bank num-

ber to store, then press

ENTER

á?8E

á?8Eá?8E

á?8E

/KFI<ü

/KFI<ü/KFI<ü

/KFI<ü

appears for 2 seconds. All the

conditions such as receiving mode and

delay condition are copied on the chan-

nel. After about 2 seconds, the scanner

automatically returns to search mode.

3. If you try to copy a frequency which is

already stored, the scanner sounds the

notice tone 3 times after you press

ENTER

LGCô=ý á?OOO

LGCô=ý á?OOOLGCô=ý á?OOO

LGCô=ý á?OOO

appears at the

bottom line. If you want to copy the

duplicate frequency anyway, press

ENTER

, or if not, press

CLEAR

to cancel.

Copying a Frequency into the Pri-

ority Channel

You can copy a frequency into the priority

channel (see “Priority” on Page 27) when the

scanner stops on the frequency during

Search, Scan, Manual, Tune, or WX mode.

Press

FUNC

then

PRI

when the frequency is

on the display. The display flashes twice and

the frequency is copied to the priority chan-

nel.

SCANNING THE CHANNELS

To begin scanning channels or to start scan-

ning again after monitoring a specific chan-

nel, press

SCAN

Note:

You must store frequencies into chan-

nels before the scanner can scan them. The

scanner does not scan through empty chan-

nels.

The scanner scans through all channels (ex-

cept those you have locked out) in the active

banks (see "Turning Channel-Storage Banks

Off and On" and “Locking Out Channels or

Frequencies” on Page 26).

Note:

To change the scanning direction,

press

Turning Channel-Storage Banks

Off and On

To turn off banks while scanning, press the

bank's number key so the bank's number

disappears. For example, to turn off bank 1,

press

. The scanner does not scan any of

the channels within the banks you turned off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

RadioShack PRO-2053 - 300 Channel Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info