Bedienungsanleitung RadioShack PRO-2053 - 300 Channel (Seite 28 von 56) (Englisch)

570004

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Special Features

voice channel or during trunking delay

time. Therefore the priority check seems

random during peak hours. Do not over-

estimate the priority check during trunk-

ing operation.

• If you program a weather channel as the

priority channel, the scanner stays in the

priority channel only when the scanner

detects the weather alert tone.

To program a frequency in the priority chan-

nel:

1. Press

MAN

2. Use the number keys to enter the chan-

nel number which contains the fre-

quency you want to program as the

priority channel. Then press

MAN

again.

3. Press

FUNC

then

PRI

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

blinks on the bottom line.

To program the priority channel directly:

1. Press

PROG

2. Press

PRI

3. Enter the desired frequency, then press

ENTER

Note:

This scanner cannot set a channel as

the priority channel if the channel's receive

mode is MOT or ED.

To program a weather channel as the priority

channel:

1. Press

2. Select the weather channel you want to

program as the priority channel.

3. Press

FUNC

then

PRI

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

flashes on the bottom line two times.

To turn on the priority feature, press

PRI

appears on the top line while in scanning

mode.

,.%F

.%F.%F

.%FE

(or

,.%NO

,.%NO,.%NO

,.%NO

if you set the priority

to a weather frequency) appears on the bot-

tom line. If the scanner detects activity on the

priority channel,

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

appears for 3

seconds. Or if the scanner detects a weather

alert tone in Priority WX mode,

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

appears for 3 seconds then changes to

3<8K?<Iý ã(!.0

3<8K?<Iý ã(!.03<8K?<Iý ã(!.0

3<8K?<Iý ã(!.0

and the scanner sounds an

alert. The scanner sounds the alert for five

minutes when it receives the weather alert

signal. After five minutes the alert stops and

the scanner beeps every ten seconds. Press

any key to stop the sound. The scanner is

ready to receive a new signal.

Notes:

• Priority WX is only for receiving a

weather alert.

• When the scanner detects a 1050 Hz

alert tone, priority WX activates and you

hear a weather alert.

• If you program a weather frequency into

the priority channel and the scanner

detects a weather alert tone on that fre-

quency, the scanner sounds the alert

tone.

To turn off the priority feature, press

PRI

CHANGING THE RECEIVE

MODE

The scanner is preset to the most common

AM or FM receive mode for each frequency

range. The preset mode is correct in most

cases. However, some amateur radio trans-

missions and trunked systems do not oper-

ate in the preset mode. If you try to listen to a

transmission when the scanner is not set to

the correct receive mode, the transmission

might sound weak or distorted.

If you want to listen to trunking transmissions

in closed mode, you might have to change

the receive mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

RadioShack PRO-2053 - 300 Channel Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info