Bedienungsanleitung Raymarine Dragonfly (Seite 35 von 118) (Englisch)

558415

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

On vessels without an RF ground system the shield

(drain) wire should be connected directly to the

negative battery terminal.

The dc power system should be either:

• Negative grounded, with the negative battery

terminal connected to the vessel's ground.

• Floating, with neither battery terminal connected

to the vessel's ground

Warning: Positive ground systems

Do not connect this unit to a system which

has positive grounding.

Breakers, fuses and circuit protection

The information below is provided as guidance

to help protect your product. The example

illustrations provided are for common vessel power

arrangements, if you are unsure how to provide the

correct level of protection then please consult a

Raymarine authorized dealer for support.

Distribution panel connection

It is recommended that your product is wired through

your vessel’s distribution panel via a thermal breaker

or fuse.

D13017-1

2 31

4 5

6 7

1. Vessel power supply positive (+)

2. In-line fuse. (If your products power cable does

not have an in-line fuse then an one fuse should

be tted.)

3. Product power cable

4. Vessel power supply negative (-)

5. * Drain wire

6. Vessel distribution panel

7. Vessel RF ground point connection

Battery connection with RF ground

If your vessel does not have a distribution panel then

your product may be wired directly to the battery with

the drain wire connected to the vessel’s RF ground

point.

D13018-1

2 4 51 3

6 7

1. Vessel power supply positive (+)

2. Vessel power supply negative (-)

3. In-line fuse (If your products power cable does

not have a built in fuse then an in-line fuse

should be tted.)

4. * Drain wire

5. Product power cable

6. Vessel battery

7. Vessel RF ground point connection

Battery connection with no RF ground

If your vessel does not have a distribution panel

or an RF ground point then your product may be

wired directly to the battery with the drain wire also

connected to the battery’s negative terminal.

D13019-1

2 4 51 3

1. Vessel power supply positive (+)

2. Vessel power supply negative (-)

3. In-line fuse (If your products power cable does

not have a built in fuse then an in-line fuse

should be tted.)

4. Drain wire connected to vessel negative power

supply.

5. Product power cable

6. Vessel battery

In-line fuse and thermal breaker ratings

The following in-line fuse and thermal breaker ratings

apply to your product:

In-line fuse rating Thermal breaker rating

5 A

3 A (if only connecting one

device)

Note:

• The suitable fuse rating for the thermal breaker

is dependent on the number of devices you are

connecting. If in doubt consult an authorized

Raymarine dealer.

• Your product’s power cable may have tted

in-line fuse, if not then you can add an in-line

fuse to the positive wire of your products power

connection.

Connecting the cable to the display

D12779-2

Cables and connections 35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Raymarine Dragonfly Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Raymarine Dragonfly

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info