30
16-CLEANING
SHUTDOWN (end of season)
At the end of each season, before switching the product o, it is recommended to remove all the pellets from the hopper with a vacuum
cleaner with a long pipe.
When not in use the appliance must be disconnected from the mains power supply. It is recommended to remove the
power cable for additional safety, especially in the presence of children.
The service fuse may have to be replaced if the control panel display does not switch on when the product is switched on again by pressing
the main switch on its side.
There is a fusebox on the side of the product, near the power socket. Open the fusebox cover with a screwdriver and replace the fuses if
necessary (3.15 A delayed) - seek assistance from an authorised and qualied technician.
CHECKING THE INTERNAL COMPONENTS
ATTENTION!
The internal electromechanical components must only be checked by qualied personnel whose technical expertise
includes combustion and electricity.
We recommend that an annual maintenance service is carried out (with a scheduled service contract). This service is essentially a visual
and functional inspection of the internal components. The following is a summary of the checks and/or maintenance that are essential for
the correct operation of the product.
PARTS/INTERVAL 1 DAY 23 DAYS 7 DAYS 15/20 DAYS 1 YEAR
UNDER THE USER'S RESPONSIBILITY
Brazier
Ash compartment
Ash pan*
Glass
Air lter (for applicable models)
BY THE QUALIFIED
TECHNICIAN
Upper exchanger
Lower exchanger
Smoke duct
Gaskets
Door closure operation
* Emptying of the ash pan depends on various factors (pellet type, stove power, stove use, type of installation...) the exact emptying time
will be suggested by experience.
