Bedienungsanleitung Redmond RI-C244-E (Seite 7 von 204) (Alle Sprachen)

659486

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

RI-C244-E

GBR

3. Minimum steam output (recommended for steaming delicate fabrics);

4. Steam feature disabled (dry ironing);

5. Self-clean feature.





the steam output control dial into the required position. If the dial is in position

steam feature disables (use the mode for dry ironing). Turn steam output control dial

in direction towards position to increase steam output.

Plug in the iron. Heating indicator on the housing will light up to indicate heating. Once

the soleplate reaches the required temperature heating indicator will go out, indicating

that the iron is ready to use.

NOTE! Constant steam is only generated when the iron is horizontal and set to high

temperature. If steam feature is enabled (steam output control dial is not in posi-

tion) and temperature setting is too low water may drip from soleplate.



Steam Shot feature is used to eliminate stubborn wrinkles. The feature can be used

during steam ironing when heating indicator on the housing is out. If heating indicator

is lit wait for the soleplate to reach selected temperature before using Steam Shot

feature. Steam output control dial must not be in position.



2-3 seconds between the shots. Steam Shot feature can be used for vertical steaming.

NOTE! When iron is set to low temperature (• position) water may drip from soleplate,

Steam Shot feature may not be applicable.



Iron REDMOND RI-C244-E can be used in an upright position to remove wrinkles from

hanging drapes, curtains, tulle, as well as dress clothes without taking them off the

hangers.

1. Turn steam output control dial into position.

2. 

3. Wait until soleplate reaches required temperature (heating indicator goes out).

4. Hold the iron vertically with the soleplate facing the garment. To avoid burning

delicate fabrics hold the iron a few centimeters away from the garment.

5. 



6. If heating indicator lights up stop steaming and wait for the soleplate to reach

the required temperature. Resume steaming after heating indicator goes out.

CAUTION! The iron generates high temperature steam! Do not touch steam to prevent

burning. Never iron clothes on the body!



You can use the iron for dry ironing even if the water tank is full. However, if using the



1. Turn steam output control dial into position.

2. Turn the temperature control dial to select the temperature appropriate for your

fabric.

3. After soleplate reaches selected temperature and heating indicator goes out, the

iron is ready to use.



Use water spray feature to dampen hard-to-iron fabrics, remove stubborn wrinkles, and



Press water spray button to dampen the fabric :

• slowly and smoothly for a dense spray

• quickly for a vaporized spray

The feature can be used as often as required from any temperature mode, as long as

there is enough water in the water tank.



Anti-drip feature prevents water from dripping onto fabric and enables to iron even the

most delicate garments. Use low temperature setting (• position) to iron delicate

fabrics.





(by removing the calcium ions which form mineral deposits when water is heated).



Turn the temperature control dial and steam output control dial into position. Unplug

the iron from electrical outlet. Open the water tank cap and gently shake the iron above

the sink to empty the tank. Place the iron into a vertical position.

Wait for the soleplate to cool down thoroughly. Wind the cord around heel of the iron.

Store in a vertical position.

Redmond RI-C244-E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info