Bedienungsanleitung Redmond RI-C244-E (Seite 8 von 204) (Alle Sprachen)

659486

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite















Fabric 

•

SYNTHETIC

Acrylic

Iron carefully. Do not use steam

ironing to prevent water from drip-

ping out of soleplate and staining

the fabric

Polyamide (capron,

nylon)

Polyurethane

Acetate

Iron on reverse side, fabric cannot

withstand high heat. Acetate dries

fast and needs little ironing

Polyester Iron using a damp press cloth

Viscose

High heat may cause discoloration,

shrinkage, or melting of fabric

SILK Silk

Do not use spray on silk to avoid

water marks

• •

WOOL Wool

Use spray or damp press cloth to

iron wool. High heat may cause

shrinkage

COTTON Cotton

Steam ironing is recommended

• • •

LINEN Linen

III. CLEANING AND MAINTENANCE



To remove scale and other debris from steam holes on the soleplate carry out self-

cleaning procedure at least once or twice a month. The harder the water the more

frequently the iron should be self-cleaned.

1. Unplug the iron from electrical outlet and let cool down thoroughly.

2. Turn steam output control dial into position.

3. -

ture control dial into position.

4. Wait for the soleplate to reach selected temperature (heating indicator will go

out). Unplug the iron.

5. Position the iron horizontally above the sink. Turn the steam output control dial

all the way to the right and hold in position, swinging the iron lightly back

and forth. Steam and hot water releasing from soleplate will remove scale and

other debris.

6. By the end of self-cleaning procedure open and empty the water tank. Close the cap.

7. Wait for soleplate to cool down thoroughly and wipe with damp cloth. Repeat the

procedure if necessary.

NOTE! Set steam output control dial into position only for self-cleaning procedure.



detergent!



Before cleaning the soleplate ensure that iron is unplugged and cooled down thor-

oughly. Cool soleplate can be wiped with damp cloth or sponge. Do not use abrasive

cleaners, aggressive chemicals, and abrasive or metal sponges.



The appliance must be stored in a dry location away from direct sunlight or heating

appliances. Store iron in the vertical position to avoid damage to the soleplate. To keep

the soleplate in good condition do not allow it to come into contact with metal and

other hard or sharp objects.

Always store the iron empty to prevent lime scale build-up that may stain fabric during

ironing.

IV. BEFORE CONTACTING SERVICE CENTER

  

Soleplate remains

cold, heating indica-

tor does not light up

Power cord is not connected to

an electrical outlet

Connect to an electrical outlet

Electrical outlet is not working

properly

Connect to properly working electri-

cal outlet

Soleplate barely

warms up

Selected temperature is too low

Turn temperature control dial to

select required temperature

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Redmond RI-C244-E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info