6
Display A3
1 . Automatic c ooking programs indicators.
2 . Timer / current time indicator / time of delay value indicator .
3 . “Time Delay” adjustment mode indicator .
4 . “Reheat” function operation indicator .
5 . “Ke ep Warm” function operation indicator.
6 . Indicators of the type of product in “STEAM/COOK” , “STEW ” , and “FRY”
programs.
7. “MUL TICOOK” temperature value indicator .
8 . Audible signals enabled/disabled indicator .
I . PRIOR T O FIRST USE
Carefully remove multicooker and its acc essories from the packaging. Dispose
of all packaging materials. Keep all warning labels, including serial number
identication label located on the housing. The absence of the serial num-
ber will depriv e you of your warranty benets! Wipe the housing of the unit
with a soft, damp cloth. Wash the bo wl with warm soapy water . Rinse and
dry thoroughly. Odor on rst use of the appliance is normal and does not
indicate malfunction. In such case, clean the unit.
Caution! Do not use the applianc e in case of any malfunctions.
II . OPERA TING MUL TICOOKER
Before Operating
Place the applianc e on a at, stable, and hard surface away from wallpaper ,
decorative c oatings, or any other objects or cabinets that could be damaged
by st eam, humidity , or high t emperatures.
Before operating, make sure that the outer and inner parts of the multi-
cooker have no dents, cracks or any other visible damages. There should not
be any obstructions betwe en heating element and the bowl.
Standby Mode
After the applianc e is connected, it enters standby mode and displays current
time in 24-hour format and the following indicators: aut omatic cooking
programs indicator , type of product indicators in “STEAM/COOK” , “STEW ” , and
“FR Y ” programs, audible signals enabled/disabled indicator. If no buttons
are pressed within a minute in program adjustment mode, multicooker
automatically goes int o standby mode, all previous settings are lost.
Non-volatile Memory
Multicooker REDMOND RMC -280E is equipped with non-volatile memory . In
case of short term power cut-o ff (up to 2 hours during cooking cycle or the
time of delay) the appliance stores all current settings and resumes its
operation without any memory loss.
Note! If y ou do not want cooking cycle to be resumed press and hold down
“C ancel/R eheat” button. The appliance switches to standb y mode.
T o Enable/Disable Audible Signals
Multicooker REDMOND RMC -280E allows enabling/disabling audible signals.
T o disable audible signals press and hold down “Time Delay / Cooking time ”
button in standby mode (to reactivate audible signals, repress and hold “Time
Delay / C ooking time” button).
T o Set the Clock
Plug in the unit. Press and hold down the “Hour/– ” button. Current time
value indicator starts ashing. P ress “Hour/– ” button repeatedly to select
hour value and “Minute/+” button to select minute value. Press and hold the
corresponding button do wn to scroll through the digits. When the maximum
value is reached, the adjustment starts from the minimum value.
When current time is adjusted, do not press any button f or a few seconds t o
save the settings.
T o Set Cooking Time
Multicooker REDMOND RMC -280E allows adjusting default cooking time of
each program. Time adjustment range and interval depend on select ed
cooking program.
T o adjust cooking time:
1 . Use “Menu” button to select automatic c ooking program. R epeatedly
press the button, default cooking time of each program is displayed.
Ke ep pressing the “Menu” button until required program indicator is
displayed. Y ou can also use “Hour/– ” and “Minute/+” buttons to select
the program.
2 .
Press “Time Delay / Cooking time” button to enter cooking time adjust-
ment mode. “Star t” button indicator , default c ooking time indicator ,
and corresponding program indicator are ashing on the display.
3 . Press “Hour/– ” button repeatedly to adjust hours and “Minute/+” but-
ton to adjust minutes. Press and hold the corresponding button do wn
to scroll through the digits. When maximum value is reached the
adjustment starts from the minimum value.
4 . T o cancel the settings press and hold down “Canc el/Reheat” button
and start adjusting from the beginning.
When adjusting cooking time of the program consider time adjustment
range and interval featured by selected cooking program (refer to “T able of
Default Settings”).
Cooking time of “STEAM/C OOK” group of programs starts to count down
after water comes to a full boil and sufcient amount of steam is gener-
ated; of “P ASTA/R AVIOLI” program — after water comes to a full boil, prod-
ucts are added, and “Start” button is repressed. Cooking time of the rest of
the programs starts to count down after y ou press “Start” button.
“Time Delay” Function
The function allows programming multicook er to nish c ooking cycle at
specic time. C ooking program can be delayed for up to 24 hours. Time
adjustment interval is 5 minutes.
1 . Select automatic c ooking program, adjust the time, and program the
appliance to delay the program. T o delay cooking program repress
“Time Delay / C ooking time” button. “Time Delay” adjustment mode
indicator and the time by which the dish will be ready (set by default)
are displayed. Time value indicator is ashing.
2 . Use “Hour/– ” button t o adjust hours and “Minute/+” button to adjust
minutes. Press and hold the c orresponding button down to scroll
through the digits. When maximum value is reached, the adjustment
starts from the minimum value.
3 . T o cancel the settings press and hold down the “Canc el/Reheat” but-
ton and start adjusting from the beginning.
It is not recommended to use “Time Delay” function if diary or other perish-
able products are being used (eggs, milk, meat, cheese, etc.). The function
is not available in “FRY” and “PAST A/RAVIOLI” programs.
“K eep Warm” Function
The function automatically activat es at the end of cooking cycle and ke eps
the dish warm at 60–80°С for up to 12 hours. In “Ke ep Warm” mode “Start”
button indicator goes off , “Cancel/R eheat” button indicator lights up. “K eep
Warm” count up is displayed.
Preliminary Deactivation of “Keep Warm”
Multicooker REDMOND RMC -280E allows disabling “K eep W arm” function in
advance. T o disable the function in the beginning of cooking cycle press and
hold down the “Start” butt on until “ Cancel/R eheat” button indicator goes off.
T o reactivate the function repress and hold down the “Star t” button, until
“C ancel/Reheat” button indicator lights up.
“R eheat” Function
Multicooker REDMOND RMC -280E allows reheating cold dishes. T o reheat:
1 .
Fill cooking bowl with food and position it inside the unit. Ensure that
the bowl makes full contact with the heating element.
2 . Close the lid until it clicks into place and plug in the unit.
3 .
Press and hold down the “Cancel/R eheat” button. Button indicator
lights up and reheating begins. “Reheat” function count up is displayed.
4 . The dish will be warmed up to 60–80°С and the temperature will bу
maintained for 12 hours. T o disable the function press “Canc el/Reheat”
button (button indicator goes off).
Multicook er is capable of maintaining the dish warm for up to 12 hours,
however , it is not recommended to leave the food on “Keep W arm” for more
than 2-3 hours, because this may affect its av or characteristics.
Standard Operating Procedure for Automatic Programs
1 .
Measure the ingredients acc ording to the recipe and place them inside
the bo wl. Ensure that all ingredients are below maximum ll mark on
the inside of the cooking bowl.
2 .
Position the bowl inside the applianc e and slightly rotate it from side
to side to ensure, that it makes full contact with the heating element.
Close the lid until it clicks into place. Plug in the unit .
3 . T o select the program press “Menu” button repeatedly , until the indi-
cator of required c ooking program is displayed. Y ou can also select
the program using “Hour/– ” and “Minute/+” butt ons. C ooking program
and “Start” button indicators are ashing; cooking time adjustment
mode indicator and default cooking time are displayed.
If cooking program you sele cted is “MUL TICOOK” , the display will show
cooking temperature adjustment mode indicator and default c ooking tem-
perature of the program.
4 . Press “Product selection” button to select the type of product. Cor-
responding subprogram indicator star ts ashing, default cooking time
is displayed. T ype of product can be selected in “STEAM/COOK” , “STEW ” ,
and “FRY” programs. Skip the step if you selected different c ooking
program.
5 . Adjust cooking time.
6 .
If cooking program you sele cted is “MUL TICOOK” , press “T emperature”
button to adjust the temperature. T emperature value indicator starts
ashing. Use “Hour/– ” button to reduce and “Minute/+” button to in-
crease the temperature. Press and hold the c orresponding button
down to scroll through the digits. When maximum value is reached,
the adjustment starts from the minimum value.
7. Delay the program if required.
8 . Press and hold the “Star t” button for a few se conds to begin cooking
cycle. The display shows remaining c ooking time and corresponding
automatic c ooking program indicator.
9 . When cooking cycle is c omplete program indicator goes off, and au-
dible sound is heard. Depending on current settings the unit either
switches to “Ke ep Warm” mode (“Cancel/R eheat” button indicator lights
up) or standby mode.
10. T o interrupt cooking cycle or t o cancel the program press and hold
down the “Canc el/Reheat” button.