Bedienungsanleitung Reebok COMPETITOR RT 8.0 TREADMILL (Seite 17 von 32) (Englisch)

559715

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

HOW TO USE A MY MEMORY WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13.

2. Select a my memory workout.

To select a my memory workout, use the increase

and decrease buttons next to the Enter button and

highlight WORKOUTS. Press the Enter button.

Then, highlight MEMORY and press the Enter but-

ton. You can also press the Memory buttons.

Use the increase and decrease buttons to select

the desired workout. When you select a workout,

the display will show the name, the duration, the

maximum speed setting, the maximum incline set-

ting, and a profile of the speed settings of the work-

out.

Note: If the display shows a flat profile, see

HOW TO CREATE A MY MEMORY WORKOUT

on page 16.

Each my memory workout is divided into one-

minute segments. One speed setting and one in-

cline setting are programmed for each segment.

3. Start the walking belt.

Press the Enter button to start the workout. A mo-

ment after you press the button, the treadmill will

automatically adjust to the first speed and incline

settings that you programmed previously. Hold the

handrails and begin walking.

During the workout, the profile will show your

progress. Press the Display button repeatedly to

view the profile. The flashing segment of the profile

represents the current segment of the workout.

The height of the flashing segment indicates the

speed setting for the current segment.

At the end of the first one-minute segment of the

workout, a series of tones will sound. If a different

speed and/or incline setting is programmed for the

second segment, the speed and/or incline setting

will appear in the display for a moment to alert you

nd the treadmill will automatically adjust to the

speed and incline settings for the second segment.

The workout will continue in this way until the small

arrow reaches the right end of the profile. The

walking belt will then slow to a stop.

If desired, you can redefine the workout while

using it. To change the speed or incline setting

for the current segment, simply press the Speed

or Incline buttons. When the current segment ends,

the new setting will be saved in memory. To increase

the length of the workout,first wait until the workout

ends. Then, press the Start button and program

speed and incline settings for as many additional seg-

ments as desired; custom workouts can have up to

40 segments. When you have added as many seg-

ments as desired, press the Stop button twice. To

decrease the length of the workout,press the Stop

button twice when you want the workout to end.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Start but-

ton. The walking belt will begin to move at 1 mph.

When the next segment of the workout begins, the

treadmill will automatically adjust to the speedand

incline settings for the next segment.

4. Select a display mode and monitor your

progress with the display.

See step 5 on page 14.

5. Measure your heart rate if desired.

See step 6 on page 14.

6. When you are finished exercising, remove the

key from the console.

See step 7 on page 14.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reebok COMPETITOR RT 8.0 TREADMILL Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info