Bedienungsanleitung Reebok Edge Bike (Seite 4 von 5) (Englisch)

559665

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

computer instruction

Functions and Features:

1. Start: Allows you to start the computer just press the START key without selecting a

program. TIME automatically begins to count up from zero. Use the UP and DOWN

keys to adjust the resistance.

2. SCAN: During the exercise stage, the computer will automatically scan the function of

SPEED, TIME, DISTANCE, RPM, CALORIES and PUSLE every 6 seconds

unless press the ENTER key to exit the auto-scan function. When the computer exits

the manual-scan then the message window will show “SCAN” for 2 seconds then

switch to auto-scan function.

3. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will

automatically count up from 0:00 to 99:59 in one second intervals. You many also

program your computer to count down from a set up value by using the UP and

DOWN keys from 5:00 to 99:00. If you continue exercising once the time has reached

0:00, the computer will begin beeping. You can press any key to stop the beep sound.

If you re-start the computer straight away then the TIME will count up from your setting

value to keep counting.

4. SPEED: Displays your workout speed value in KM or MILE per hour.

5. DISTANCE: Displays the accumulative distance traveled during each workout up to a

maximum of 999.0KM/MILE.

6. RPM: Your pedal cadence.

7. CALORIES: Your computer will estimate the cumulative calories burned at any given

time during your workout.

8. PULSE: Your computer displays your pulse rate in beats per minute during your

workout.

9. PULSE RECOVERY: During the START stage, leave your hands holding on grips or

leave the chest transmitter attached and then press “PULSE RECOVERY” key. Time

starts counting from 01:00 - 00:59 - - to 00:00. As soon as 00:00 is reached, the

computer will show your heart rate recovery status with the grade F1.0 to F6.0 and

message window will show your workout situation. The details as follows,

1.0 means OUSTANDING

1.0＜F＜2.0 means EXCELLENT

2.0≦F≦2.9 means GOOD

3.0≦F≦3.9 means FAIR

4.0≦F≦5.9 means BELOW AVERAGE

6.0 means POOR

Note: If no pulse signal input is found the computer will show “P” on the message window.

If the computer show “Err” on the message window, please re-press the PULSE

RECOVERY key and please make sure your hands are placed firmly on the grips.

10. TEMPERATURE: Display the current temperature.

Key function:

There are 6 button keys and the function description as follows:

1. START/STOP key: a. During the exercise mode, press the key to STOP exercise.

316 Saddle 1

317 Main Frame 1

318 M5X14 Screw 1

319 Upright lower section insert 1

323 Saddle post bottom holder 1

330 M8 nut 1

403 Main Chain Cover- Left 1

404 Seat Post Plastic Holder 1

405 Chain Cover-Front 1

407 Main Chain Cover -right 1

409 Plastic Insert 9

410 Pedal-Left 1

411 Crank cap 2

412 M10X1.25 Nut 2

413 Crank-Left 1

414 Crank-Right 1

415 Pedal-Right 1

501 6004 Bearing 2

502 M20 Nut 2

503 Ø22 Washer 1

504 Driving Belt pulley 1

505 Driving Belt 1

506 Crank Shaft 1

507 M8X8 Screw 4

508 M6X6 Screw 4

509 Flywheel Ring-Shaped Holder 1

510 6300 Bearing 3

511 M10X17X4 Nut 1

513 Flywheel 1

514 Aluminium Disk 1

515 M8X15 Screw 8

516 Flywheel Driving Belt pulley 1

517 6000 Bearing 1

519 Tension Pulley Bracket 1

520 Tension pully bracket clip 1

521 Flywheel axle 1

522 Tension Pulley Spring 1

524 Tension Pulley Fix Screw 1

Part No. Part name

Quantity/Menge

101 Overlay 1

102 Console housing-Upper 1

103 Battery Cover 1

104 Handle Bar Cover-Rear 1

105 Handle Bar Cover-Front 1

106 Hand Pulse sensor Wire 2

108 Speed Sensor Wire- upper 1

109 Console housing –lower 1

110 M4X15 Screw 20

111 PC Board 1

112 Console –upper 1

201 Handle Bar Tube 1

202 Hand Pulse Sensor-Upper 2

203 Hand Pulse Sensor Cover-lower 2

204 Handle Bar Foam Grip 2

205 Hand pulse sensor Wire –lower 2

206 Handle Bar end cap 2

209 Speed sensor Wire 1

210 Upright Tube 1

212 M3X12 Screw 4

213 M5X14 Screw 6

214 Ø8 curve Washer 2

215 M8X20screw 6

301 M8X65 screw 4

302 Ø8 washer 12

303 Rear Stabilizer Adjustment Foot 2

305 Stabilizer tube end cap 4

306 Stabilizer tube -Rear 1

307 Stabilizer tube –Front 1

308 Front Stabilizer foot 2

309 Transportation Wheel set 2

311 Speed sensor 1

312 Seat post 1

313 Seat post insert 1

314 Seat Post height Adjustment Knob 1

315 Speed sensor Wire-Lower 1

14 15

525 M10 Nut 3

526 Flywheel D-Shaped Holder 1

527 One way bearing 1

528 6003Z Bearing 2

535 M6 Nut 1

537 Ø8 Spring-Washer 10

601 Ø10 washer 2

602 D0.8 X 20 Spring 1

603 Magnet bracket 1

604 M10X73 Magnet bracket axle 1

605 M6X40 bolt 1

606 Motor 1

607 Ø6 washer 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Reebok Edge Bike Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info