587902
9
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
9
s
s
s
Assembly note
During the assembly or
disassembly of the gas hose,
it is necessary to counter-hold
the unit by the gas connection
nipple with an open-end wrench
size 17, whilst observing the left-
handed thread.
This process also applies to
the pressure controller, hose
breakage protection and all further
gas components.
Tighten gas hose:
Turn the union nut anticlockwise
Loosen gas hose:
Turn the union nut clockwise
Icing up of gas cylinders
With insufficiently dimensioned
gas supply systems, there is a risk
of the pressurised gas cylinder
icing up.
Due to the reduction of the gas
pressure, it is no longer possible
to guarantee the correct gas
supply to the unit.
Crystalline frost formation on
the gas cylinder(s) must not
be defrosted with naked flames,
glowing objects, radiators, etc.
In order to avoid the gas
cylinder(s) icing up, it is necessary
to configure the gas supply
in accordance with the unit
connection value, the time
in operation and the ambient
temperature of the supply tank.
1
6
2
4
5
4
3
6
5
6
Attachment multi-cylinder set (accessory)
In order to guarantee a regular gas take-off insofar as possible,
all cylinder valves must be open.
The cylinder battery can be easily expanded,
through the use of additional sets.
Legend:
1 = Gas hose to the unit
2 = Hose breakage protection
3 = Gas pressure controller
4 = HP hose 0.4 m
5 = T-connection
6 = Cylinder valve
Connecting the gas supply
1. Connect the
pressure controller
to the gas cylinder
or gas supply
system.
Observe the left-hand thread!
2. Open cylinder
valve(s) or shut-
off valve
of the supply
line.
With simultaneous discharge
from multiple gas cylinders,
all valves must be opened.
3.
Push the unlock
button on
the hose breakage
protection
after opening
the valve(s).
This process is also necessary
after every cylinder change.
4. Check all gas connections for
leak-tightness using suitable
media.
For example with:
Soap solution
or
leak detection
spray.
NOTE
Because these are ball
nipple screw connections
in accordance with DIN 4815,
part 2, only appropriate,
fitting hoses may be used.
NOTE
Only hoses for liquid gas in
accordance with DIN EN 16436-1,
pressure class 30 may be used
for construction site operations.
counter-hold
counter-hold
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO PGT 60E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO PGT 60E

REMKO PGT 60E Bedienungsanleitung - Deutsch - 28 seiten

REMKO PGT 60E Bedienungsanleitung - Holländisch - 24 seiten

REMKO PGT 60E Bedienungsanleitung - Französisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info