Bedienungsanleitung REMKO RVS DC serie 50-80-130-180 (Seite 4 von 44) (Englisch)

726821

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Safety notes

Disposal of packaging

All products are packed for

transport in environmentally

friendly materials. Make a valuable

contribution to reducing waste

and sustaining raw materials.

Only dispose of packaging

at approved collection points.

Disposing of the units

and their components

Only recyclable materials are used

in the manufacture of the units

and components.

Help protect the environment

by ensuring that the units

or components (for example

batteries) are not disposed

of in household waste, but

only in accordance with

local regulations and in an

environmentally safe manner,

e.g. using authorised disposal and

recycling specialists or council

collection points.

Environmental

protection and

recycling

Carefully read the operating

manual before placing the unit

in service for the first time. It

contains useful tips and notes as

well as hazard warnings to prevent

injury to persons or material

damage

. Failure to follow

the directions in this manual can

endanger persons, the environment

and the equipment itself and will

void any claims for liability.

■

Keep this manual and

the refrigerant data sheet near

the unit.

■ Only qualified personnel may

set up and install the units and

components.

■ The set-up, connection, and

operation of the unit and its

components must take place

in accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Stationary units must be

permanently installed for

operation.

■ Modification of the units

and components supplied by

REMKO is not permitted and

can cause malfunctions.

■ Units and components may

not be operated in areas where

there is an increased risk of

damage. Observe the minimum

clearances.

■ The electrical power

supply is to be adapted to

the requirements of the units.

■ The operational safety of

the units and components

is only assured if they are

fully assembled and used as

intended. Safety devices may

not be modified or bypassed.

■ Do not operate units or

components if there are obvious

defects or signs of damage.

■ All housing parts and unit

openings, e.g. air inlets and

outlets, must be free from

foreign objects, liquids, or gases.

■ The units and components must

be kept at an adequate distance

from flammable, explosive,

combustible, abrasive and dirty

areas or atmospheres.

■ Contact with some parts of

the unit or components can

result in burns or other injuries.

■ Installation, repair and

maintenance work may only

be carried out by authorised

specialists. Visual inspections

and cleaning can be performed

by the operator as long as

the unit is disconnected from

the power.

■ Take appropriate precautions

when performing installation,

repair or maintenance work

or cleaning the unit to make

sure the unit does not pose

a danger to persons.

■ The units and components

should not be exposed to any

mechanical load or extreme

levels of humidity.

Guarantee

In order to make warranty claims,

it is essential that the ordering

party or their representative

complete and return the "certificate

of warranty" and “commissioning

report” to REMKO GmbH &

Co. KG at the time when the

equipment was purchased and

commissioned. The warranty

conditions are listed in the "General

terms and conditions".

Furthermore, only the parties

to a contract can conclude

special agreements beyond these

conditions. In this case, contact

your contractual partner in the first

instance.

REMKO series RVS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO RVS DC serie 50-80-130-180 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO RVS DC serie 50-80-130-180

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info