Bedienungsanleitung Renusol ConSole (Seite 2 von 8) (Englisch)

613882

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

2 — Renusol ConSole · EN · 04/2011

INSERTION

Product Information

The ConSole assembly system is the ideal solution for installing PV modules

on flat roofs with pitch of up to 5° without roof penetration. Most commercially

available framed standard PV modules fit on the ConSole.

The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to

resist the wind loads. The necessary weight of the ballast depends on the height

of the building, its location and condition of the ground and the wind and snow

loads.

Reference values for the necessary ballast are contained in "Preparing the

assembly – point 2." in the table on page 5 above.

The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).

The material of the ConSole satisfies the fire prevention measures of DIN 4102

class B2. The energy amortization time of the ConSole is shorter than one year.

A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up

to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast

installation. Generously sized ventilation channels ensure efficient air circulation.

The boreholes on the ground of the ConSole are conducive for drainage.

We wish to point out that work must be carried out according to current safety

regulations (e.g., VBG37) in order to prevent accidents. Please carry out the

respective safety measures.

Warranty

Our warranty only applies if an original ConSole complete system is used.

In order to adjust the system optimally for the local conditions and to fulfil all

applicable regulations, we recommend an expert report be prepared if in any

doubt. The installation should be carried out by skilled and trained personnel.

If you have questions concerning training, please contact Renusol.

Installation instruction

Please read these installation instructions carefully before starting installation.

First, familiarize yourself with the system components. The ConSole can be

stored and used at temperatures of between -30° C and +50° C. We recommend

the ConSoles be assembled at plus temperatures. The roof area must in any case

be free of snow and ice.

During the installation and, in particular, while working on the roof, be sure to

observe the relevant health and safety provisions and please follow the current

rules and regulations.

Please also check the current version of our installation instructions on our

website at www.renusol.com. Here, you can also find instructions in other

languages, if required. The figures and texts in the installation instructions

correspond to current technology at the time of printing. We reserve the right

to make changes.

The installation instructions merely contain recommendations in accordance

with current technology and are based on the experience of how systems made

by Renusol can be installed. If any roof or object-specific characteristics are to be

considered, please, if necessary, involve specialists such as roofers or structural

engineers for the purposes of explanation.

The Renusol team wishes you a successful installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Renusol ConSole Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info