Bedienungsanleitung Respekta KGE144 (Seite 22 von 26) (Deutsch, Englisch)

793543

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English User’s manual FRIDGE FREEZERS

fi210217

What to do when...:

a) The appliance does not function (it is not running).

Please check:

Is the plug in good order and is it plugged in the socket

properly?

Is the electricity coming through?

(check this by possibly plugging in a small appliance such

as a hand mixer or hair dryer etc.).

Is the appliance switched on? (Temperature dial should

not be set to ”0”).

Warning!

In the event of a fault or of a power failure, the insulation of

the appliance’s walls provides 12 to 15 hours storage time

for the frozen foods after the beginning of such failures.

Considerably more time is granted in specially insulated

appliances. Ask your dealer what is the relevant: “Storage

time in an emergency“.

If it takes longer to eliminate a problem, the frozen food in

the appliance begins to defrost. Therefore, take prompt

action to eliminate the problem and, if necessary, move the

frozen food to another freezer (perhaps to a neighbour).

b) Your appliance is not cooling sufficiently.

The freezing process is taking too long.

The compressor is running too often.

Please check:

Did you make sure that the fridge / freezer was left to

stand for at least 2 hours before switching it on? (To

stabilise the circulation of the refrigerating fluid) see:

“starting up“.

If not; unplug your appliance and lift it to one side,

with the door closed, for a short while, i.e. tilt it and then

place it back down on its feet again. After 2 hours plug it,

back in. Do not open the door again for about 12 hours

(i.e. until the red light - if provided - has gone off).

The door does not close tightly and is not sealing

properly.

Test: place a sheet of paper between the seal and the

casing and close the door. It should be difficult to pull out

the sheet of paper on all sides.

If the paper slides out easily on one or more sides, call

your nearest service department.

Heavy ice formation on the inside walls of the freezer

compartment (see:“ cleaning and maintenance“).

The appliance is exposed to direct sunlight or is sited

near a direct heat source (oven, radiator etc.).

Protect the appliance against direct sunlight / check the

distance from the heat source / place an insulation plate

between the appliance and the source of heat

(See “Choosing where to install your appliance“).

The freezer has been filled up with a quantity of fresh

food, which does not comply with the freezing capacity

indicated on the rating plate (XX kg /24h).

Is the ventilation working properly, the ventilation grille

covered or is the condenser on the outer rear wall full of

dust?

c) Your appliance is excessively noisy.

Please check:

Is the cabinet standing level and steady, are any nearby

objects or items of furniture being vibrated by

the cabinet? Make sure everything at the rear is free,

carefully bend back any parts touching.

Note: slight bubbling noises are normal for this type of

refrigeration system.

Warning

On no account should you undertake any technical

interventions or attempts at repair on your appliance.

12 Getting your appliance serviced

Any repairs or interventions on the appliance should

only be carried out by your nearest service department,

as otherwise the user may run considerable risks and

the guarantee may no longer be valid.

Consult the enclosed guarantee card or the separately

enclosed list of after sales centres, to see which company is

responsible for servicing your appliance.

If there is no indication of the nearest service department in

the documentation provided, then contact your dealer.

Repairs by the service department to eliminate

faults that have occurred because of non-adherence to the

information and advice given in this user manual, have to be

charged to the customer and are not covered by your

dealer’s guarantee.

In order to receive immediate help, make sure you have

ready the following essential data to identify your appliance:

Appliance type and model (see the rating plate)

Date of purchase

Name and place of your dealer

Description of the fault

13 Guarantee

The general terms and duration of the guarantee are

those stated on the guarantee card here enclosed, or

supplied by your dealer at the time of purchase.

Your purchase receipt is important to the guarantee

proof.

The manufacturer works constantly at the further

development of all products. Please therefore bear this in

mind as the form, set up and technology are subject to

change, without prior notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Respekta KGE144 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info