Bedienungsanleitung Robbe Futaba FX-40 (Seite 23 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Start display

FX-40

10. DESCRIPTION OF THE START DISPLAY

The most important information relating to the transmitter pro-

gramming is displayed on the Start screen. At the same time

most of the display fields also constitute operating buttons,

nd you can move to the Set-up menu for the appropriate

function simply by pressing the corresponding area of the

screen.

Timer 1 + 2

Timer mode

and pre-set

time display

Reset timer to

e-set time

value

ess to call up

the Set-up

Start / Stop

button and

time display

Modulation dis-

play

Total operating

time. Press to

reset.

Display of current spot

frequency and channel

number. Press to call

up the Set-up menu.

Music player for playing

back music files and

adjusting volume.

Press to call up the Player

menu.

Date and time

of day. Press to

call up the Set-

up menu.

Trim position display of

the trimmers T1 … T8

and CD. Press to call

up the display of all

trimmers.

CAUTION: IMPORTANT!

Please make it a routine matter to check the residual battery

capacity as often as possible, and r

echarge the transmitter

battery in good time. If the low-voltage alarm (at 19%) should

be triggered during a flight, land the model without delay,

switch off the transmitter and recharge the battery.

Please check before you launch a model that you have selec-

ted the appropriate model memory!

• The data displayed on the screen is constantly updated, and

this can occasionally result in the numeric display flickering

slightly. This is completely normal, and does not indicate a

transmitter fault.

• The contrast of the screen and the brightness of the back-

lighting can be adjusted in the “Display” Set-up menu. In the

same menu you can adjust the power-on time for the back-

lighting.

IMPORTANT:

• The transmitter features an automatic power-off function

which is trigger

ed if the sticks ar

e not moved (or are moved

only very slightly) within the pre-set time The power-off time

can be set in the “Transmitter power-off time” menu point.

The power-off time can be set to any value within a broad

range (10 … 60 minutes), or even switched off completely

(i.e. power always on). The default setting is 30 minutes.

Model name

Press to call up

the Model Select

menu.

User name

Press to call up

the Input menu

Flight condition

name

Press to call up the

Select menu.

RF transmis-

sion indicator

Battery capacity display

The low-voltage alarm

sounds at 19% capacity.

Cease operations immedi-

ately if this should occur!

Menu buttons

• System

• Model

• Linkage

Direct buttons

The buttons S1 … S3 are located in the

transmitter case just below the screen.

essing them takes you directly to the

three main Select menus: System,

Linkage and Model.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info