Bedienungsanleitung Robbe Futaba FX-40 (Seite 29 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Curve set-up

FX-40

LINE = 17-POINT CURVE AND SPLINE = 17-POINT CURVE, ROUNDED

The methods of setting and adjusting the Line and Spline curves are identical; the

nly difference with the Curve variant is that the transitions at the points on the

Spline are mathematically rounded, producing a more harmonious shape. The

number of curve points suggested by the software varies between 3 and 9 points,

according to the Set-up menu in which the Line or Spline is called up; the curve is

initially displayed as a straight line.

The user is free to vary the number of points within the range 2 to 17 points by

adding or erasing individual points. The curve points are also variable in the verti-

cal (Y-axis) and horizontal (X-axis) directions.

For a simple symmetrical setting activate the “ Separate.” button field and select “

Combine.”.

MOVING THE POINTS IN THE VERTICAL DIRECTION (Y-AXIS)

Select a curve point using the cursor buttons (B), pr

ess the Rate button field, and

assign the desir

ed rate to that point using the control button field (A) or the 3-D

Hotkey.

OFFSET

The Offset setting is used to move the entire curve in the vertical direction. If the

fset value is up to 50%, the travel r

emains the same for both sides of neutral, but

if the value is any higher, the servo travel will be at its end-point at one extreme, so

the travel becomes increasingly asymmetrical.

ADDING A POINT (USING THE TRANSMITTER CONTROL)

• Activate the “Point” button field.

• Select a location on the curve using the transmitter contr

ol (blue cursor line) and

press the “Reset” button. The screen displays an “empty” point.

• Press the “Rate” button; this assigns a rate (Y-value) to the point corresponding

to the shape of the curve. The colour changes to pink.

• Alternatively you can assign a new rate within the range +150 to -150% using

the vertical control button fields (A).

ERASING A POINT

• Activate the “Rate” button field; the display in the button field changes to

“Delete”.

• Select the point to be erased using the horizontal control buttons (B) (colour

changes fr

om gr

een to pink).

• Press the “Delete” button; the assigned rate for this point is erased, and an

“empty” point appears on the screen.

You now have two options:

1. Assign a new, different rate to the point using the control button field A.

2. Delete the point completely; for doing that, jump to the next point (control but-

tons B).

ADDING A POINT (USING THE CONTROL BUTTONS)

It is also possible to add a new point using the button fields:

• Activate the “Rate” button field.

• Select a curve point close to the new desired position using the contr

ol buttons

(B) (colour changes from green to pink).

• Move the point on the curve using the control buttons (C) (cursor display chan-

ges to an “empty” point).

• Press the “Rate” button; this assigns a rate (Y-value) to the point corresponding

to the shape of the curve. The colour changes to pink.

• Alternatively assign a new rate within the range +/-150% using the control but-

ton field (A).

(A)

(B)

(C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info