520094
33
Zoom out
Zoom in
Vorherige Seite
1/105
Nächste Seite
System menu
FX-40
33
15.2 SCREEN (CONTRAST, BACKLIGHT,
POWER-OFF TIME)
In the “Display” Set-up menu you can adjust, select and cali-
brate various aspects of the LCD screen.
Screen contrast setting
Screen backlight brightness setting
Pre-set transmitter power-off time
Pre-set backlight power-off time
Selection of screen background colour
Touch-screen calibration
LCD screen contrast setting
Left-hand button -> greater contrast
Right-hand button -> less contrast
LCD backlight brightness setting
Left-hand button -> darker
Right-hand button -> brighter
LCD backlight power-off time
Pre-set time after which the LCD screen
backlighting is automatically switched
off. In actual day-to-day use you should
always select a short power
-off delay in
order to obtain maximum possible
transmitter operating time. Pressing the
touch-screen automatically switches
the backlighting on again.
Background colour
Pressing the red, green, blue or
brown buttons changes the back-
gr
ound to the corresponding colour.
Calibrating the touch-screen
This function adjusts the position of the
touch-screen function.
Press the “Cal.” button; the calibration dis-
play appears:
Use the stylus (combination tool) to press
exactly on the centre of the cross-hairs
for about two seconds.
When the transmitter has detected the
position, the cross-hairs image jumps to
the top left point, then bottom left, bottom
right and finally top right. Repeat the pro-
cedure at each point.
After the last point the cross-hairs image
disappears from the screen.
Press anywhere on the screen to conclude
the calibration process; you are then returned
to the Set-up menu.
Transmitter power-off time
Pre-set time after which the transmitter is
automatically switched off after the last
movement of a contr
ol function. The soft-
ware monitors the movements of the
transmitter controls, and if no movement
greater than about 2 - 3% of total control
travel is detected, the transmitter switches
itself off after the pre-set time has elapsed.
This feature is designed to prevent the
transmitter battery being discharged to a
dangerous level if you forget to switch the
transmitter off.
NOTE:
For Trainer mode operations please ensure
that the T
eacher occasionally operates a
function on his transmitter
, otherwise there
is a risk that the automatic transmitter
power-off will be triggered during protrac-
ted training sessions if no corrections are
made at the Teacher transmitter for a long
period.
Under certain circumstances it may be
better to disable the automatic transmitter
power-off feature for such operations (dis-
play: “always on”).
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Robbe Futaba FX-40 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Robbe Futaba FX-40

Robbe Futaba FX-40 Bedienungsanleitung - Deutsch - 105 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info