Bedienungsanleitung Robbe Futaba FX-40 (Seite 35 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

System Menü

FX-40

15.5 SWITCH - SWITCH TYPE ASSIGNMENT

It is possible to alter the physical position of the switches A …

H; the procedur

e is described on page 7 of these instructions.

If you make changes to the physical location of the switches

compared to the standard arrangement, you will also need to

adjust the software accordingly, otherwise the on-screen gra-

phical display of switch positions will not be correct.

These adjustments are carried out in this Set-up menu.

Various types of toggle switch, including two-position or three-

position, momentary or latching and combination versions are

available. Push-buttons and rotary controls (pots) can also be

installed instead of the standard items.

A range of special switches with suitable connectors are avai-

lable as optional accessories.

Accessing the Set-up menu

By default the switch display is locked to avoid the danger of

accidentally changing the switch assignment. First pr

ess the

“Lock” button field; it then changes to

“Free”.

Type = switch type select

The following types of switch can be selected:

• Lever

= switch with lever

• Button = momentary switch

• Dial = Dial control (pot)

Mode = switch mode select

The following switch modes can be selected:

• Moment= switch with momentary function

(springs back)

•

ALT = switch with Memory function (stays in

set position)

3P moment = mode select for 3-position momentary

switch

The following switch types can be selected:

• Single= switch with single-sided momentary action

•

Dual = switch with dual momentary action

Posi = 2-position / 3-position switch select

The following varieties of switch can be selected:

• 2Posi

= two-position switch

• 3Posi = three-position switch

15.6 TRANSMITTER CONTROL SETTINGS / REVERSE

STICK RESPONSE TIME ADJUSTMENT

Set-up menu for hardware reversing of transmitter controls, for

setting the r

esponse time of the sticks J1 … J4, and for selec-

ting the stick mode.

ransmitter control reverse (har

dware reverse)

This menu provides a means of reversing the transmitter con-

trol har

dware, including the primary sticks, rotary knobs, swit-

ches and trim levers. If you carry out a hardware reverse, the

corresponding transmitter control operates in the opposite

direction. This setting does not affect the screen display (per-

centage value / prefix).

We recommend leaving these settings at NORM unless you

have very special requirements. The facility is only intended for

very unusual cases where pilots have become accustomed to

operating particular functions “the wrong way round”,

because it suits their individual flying style.

Stick response time

In this menu you can adjust the speed with which the servos

espond to stick movements. The new PCM G3 system is so

fast that many pilots find that they need to familiarise themsel

ves with it gradually.

Here you can set a response time for each stick separately by

entering a value in the range 1 … 32: the higher the value you

set, the more slowly the stick movements are passed on to the

servos.

You will also find a Hysteresis (dead zone) point in this menu,

which enables you to set a minimum stick movement after

which the change in position is passed on to the servos. You

can set any value in the range 0 … 32.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info