Bedienungsanleitung Robbe Futaba FX-40 (Seite 41 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Linkage Menu

FX-40

16.5 SOUND (MUSIC / SOUND FILES)

In this menu point you can assign sound files to the various

switched functions. Each switch position can be allotted its

own sound, regar

dless of whether it is a physical switched

function or the position of a transmitter control switch. A total

of twenty-two separate switch positions are available for

sound links, together with the actions of switching On and Off.

The sound files to be used must be in the .wav format. These

can be generated by various methods: directly using the FX 40

transmitter’s integral microphone, or with the help of a PC. Vir-

tually all PCs running the Windows operating system feature a

Sound Recorder, which can be found in the Start /Programs

/Accessories menu. PC sound files can then be created using

a microphone connected to the PC. Various free sound crea-

tion programs are available on the Internet; a good example is

“cool edit 96”, which also provides post-editing facilities (cut-

ting, amplifying etc.).

The procedure for recording sound files using the transmitter’s

Recorder is described below.

IMPORTANT:

Sounds must be stored in the W

AV folder on the D/P card. The

transmitter only searches for sounds in that location, and if

they are stored anywhere else, they will not appear in the pre-

view.

The D/P card must always be initialised in the transmitter

before you write data from a PC to the card. This is the proce-

dure:

• Insert the card in the transmitter and switch it on.

• The initialisation process takes place automatically,

and four folders are created on the Data Pack:

• BMP for images

• WAV for sound files

• WMA for music files

• MODEL for model memory files

Experienced computer users can also set up the folders them-

selves; if you wish to do this please note that capital letters

must be used for the folder names. For memory capacity rea-

sons the picture and sound files are ALWAYS stored on the

D/P card. This means that you must copy the associated

sounds at the same time as the model memory, if you need to

copy the memory contents to another D/P card for use in a

second transmitter

If this link is not present, the linked sound track will be dis-

played, but no sound will be played.

Creating sound files using the internal recorder

Pressing the record button (microphone symbol) opens the

Sound Recorder. Operate the r

ecord button and speak the

required message into the microphone. The maximum length

of the recorded sound is three seconds, although sounds

recorded on the PC may be up to ten seconds in length. The

transmitter assigns a sequential number to the series of

sounds. Assign a suitable name to the file (see right).

Automatic Continue

It is possible to assign single switching mode (arrow

symbol) or sequential switching mode (multi-arrow

symbol) to each operation of a particular switch. The

latter is used for calling a series of flight manoeuvres.

Linking sound files

Pressing the appropriate file button opens a list of the availa-

ble sound files. At this point you can assign the sounds to the

corresponding switch functions. It is also possible to erase the

link, and erase the files. Y

ou can also rename the sound files

using the “Name” button.

Record

Stop

Play

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info