Bedienungsanleitung Robbe Futaba FX-40 (Seite 44 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Linkage Menu

FX-40

VC 1 - 4

This set-up menu is used to configure the virtual func-

ions VC 1 … 4. The term ‘virtual function’ is used to des-

cribe functions which use other channels as ‘double

functions’, i.e. they do not have their own servo channels.

Examples of this are the butterfly (crow) function, which

controls the aileron and flap servos, or the elevator func-

tion of a flying wing model, where the ailerons have a dual

function, ‘doubling up’ as elevators.

Each of the FX-40’s virtual functions features its own con-

trol curve (AFR) with 2 … 17 points, providing an extre-

mely straightforward method of adjusting the double

functions separately.

In total the system features sixteen transmitter control

curves (AFR): twelve for functions 1 … 12 plus four for the

virtual functions 1 … 4.

Selecting the channel switches

In this menu you can select the transmitter controls to be used

for the switched channels 13 + 14 (PCM G3 system), and for

switched channel 9 (PCM 1024 system).

This is also where you determine the direction of the switching

action of the transmitter contr

ols, and the position at which the

switch is trigger

ed.

PCM G3 system

DG 1 = switched channel 13

DG 2 = switched channel 14

PCM 1024 system

DG 1 = switched channel 9

PPM 8 system

Eight proportional channels; no auxiliary switched channels

available.

Selecting the trims

It is possible to select any trims you wish to use; simply press

the trim button for the function in question, and the trim set-up

menu appears on the screen.

rim rate = trim travel setting, infinitely variable from -150 …

+150% of the transmitter contr

ol travel.

Step = trim incr

ement, variable in the range 1 - 200. Maximum

total trim value = 200.

(example: step = 4 x 50 = 200; 200 x 1 = 200; 1 x 200 = 200)

Trim mode

Normal = the normal type of trim: the trim range is symmetrical

around the centr

e point. Adjusting the trim causes the selected

(fixed) trim range to be of

fset around the centre point, with the

result that the servo end-points alter.

ATL = asymmetrical trim: the trim value only changes at one

end of the transmitter control. This is generally used for the

thr

ottle function, as it allows you to fine-tune the idle setting

without altering the full-thr

ottle position.

CTRM = Centre Trim: this trim function also works around the

centre position of the transmitter contr

ol, but without af

fecting

the end-points. Since the end-points are fixed, this trim mode

changes the trim travels, which become asymmetrical.

Sepa / Glob - Separate / Global

The Glob / Sepa button is used to determine whether the trim

control is the same for all flight modes for the function in ques-

tion = Glob (global). If you switch to Sepa (separate), you can

change the trim contr

ol for this function in each of the eight

flight modes. The display changes when you operate the

selected flight mode change-over switch. It is also possible to

set a combination of global and separate-acting trims.

NOTE:

ou can use the option of Global or Separate trims not only to

configure different trim controls for each flight mode, but also

to adjust and stor

e dif

ferent trim values for any particular flight

mode.

Typical applications:

1. Different trim controls for each flight mode

In the Normal flight mode the trim controls T1 + T4 are

assigned to the contr

ol functions J1 + J4, wher

eas in the

‘Aerobatics’ flight mode the trim controls T1 + T4 are assig-

ned to the opposite functions (‘cross trims’). This arrange-

ment enables you to control the function with one hand,

whilst adjusting the trim of the same function with the other

hand.

2. Differ

ent trim values for each flight mode

For model helicopters it can be extr

emely advantageous to

set and store the different trim values for the static ‘Hover’

flight mode and the dynamic ‘Aer

obatics’ flight mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info