Bedienungsanleitung Robbe Futaba FX-40 (Seite 50 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Linkage Menu

FX-40

16.15 STOPWATCH

The Stopwatch menu is used to set up and adjust the electro-

nic timers pr

ovided by the FX-40 transmitter. The timers are

displayed in two on-screen windows, which means that you

have constant access to two crucial times, for example: the

overall flight time and the motor run time of an electric-powe-

red model. The timers can be set up individually for each

model. The pre-set configuration is automatically loaded when

you switch from one model to another.

For each timer you can select either of two operating modes -

count-down (‘down’) and count-up (‘up’). If you choose a

count-down timer, you can enter a maximum flight time for

each model, e.g. according to the volume of the fueltank or the

capacity of the flight battery. As soon as you start the timer,

the time begins counting down, starting from the initial value

you have entered. The remaining residual time is constantly

displayed in red figures.

In contrast, the count-up timer starts at ‘0’ and displays the

time which has elapsed since it was started by operating the

switch. In this case the numbers are displayed in black. For the

last twenty seconds of the period the transmitter emits an

audible signal every two seconds. Over the last ten seconds of

the programmed time a signal sounds every second. When the

set time is reached, a continuous tone sounds for several

seconds. The timer then continues running, but with a nega-

tive prefix.

Mark the ‘Stopwatch’ option in the base menu. The screen

display now looks like this (in the screen shot certain settings

have already been entered):

Working from this main Timer function menu, you can start or

stop the selected stopwatch by touching the display field.

Operating the ‘Reset’ button resets the screen display.

However, the main purpose of the two timer frames is for pro-

gramming the stopwatches. Marking the field in the ‘Mode’

line toggles between the count-up (‘up’) and count-down

(‘down’) functions of the timer. The start or finish time of the

stopwatch can also be programmed in the same line. When

you touch the corresponding field, the arrow buttons can be

used as a convenient method of setting the required period for

a count-down timer in minutes and seconds.

With the timer configured in this way, you can move on to defi-

ning the switches which are to be used to control the timers. In

each case a switch can be assigned for:

• resetting the timer (‘Reset’)

• starting the timer

• stopping the timer, and

• recording lap times (individual time).

Marking the appropriate switch field calls up the switch select

menu on the screen. You can now define a switch and its

direction of operation using the procedure which should by

now be familiar.

The default set-up is no switch, and the screen displays

‘NONE’. The same switch can also be assigned to individual

options of the timer function.

When you define a switch for recording individual times (lap

times), an additional ‘List’ field appears. If you now operate the

‘lap time’ switch while the timer is running, the stopwatch sto-

res the elapsed time to that point. This provides a means of

recording the times for particular phases of a flight, e.g. indivi-

dual lap times in a pylon race.

The lap times can be displayed on-screen by marking the ‘List’

field in the Timer display: the ‘stopped’ times are listed in the

display which now appears. The screen-shot below shows this

display.

Marking the ‘Reset’ field of the associated timer function resets

that timer, although it is also possible to define a switch specifi-

cally for that purpose.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info