Bedienungsanleitung Robbe Futaba FX-40 (Seite 65 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Model menu

Fixed-wing model aircraft

FX-40

You will find two button fields labelled ‘Current position’ (Cur.

pos.); these are used to call up and adjust the current posi-

tion of the throttle stick for the lower range from 0 to 49%

(min.) and for the upper range from 50 to 100% (max.). The

percentage values are displayed in their respective fields.

This screen shot shows a typical example of programming for

this sub-menu.

• Settings for particular throttle states

The software of the FX-40 provides two fixed throttle states

which you can adjust and call up at any time; these have

alr

eady been described in the Base menu.

- Motor cut-of

f function (motor off): Section 16.12, page 48

- Idle-up (Idle 2): Section 16.13, page 48

In this menu you can program the settings for actuating the

needle valve for these throttle states. When you activate

one of these functions, the throttle servo runs to a particular

position. At the same time the needle valve setting varies so

that the mixture is optimum for the new carburettor setting.

The settings are entered as percentage values using the

familiar procedure: mark the field, and enter the value using

the arrow buttons. In each case the setting is immediately

displayed.

When you want to return to the first screen of this option, sim-

ply mark the ‘2/2’ button field in the top right corner.

18. MODEL MENUS (FIXED-WING MODELS)

In this Section we analyse the settings which are specific to

fixed-wing model aircraft. The options cover

ed here are those

which have not already been discussed in Section 17 (see

page 54). From the main screen, activate the Model menu by

touching the field bearing the image of the model aircraft: the

overview of the model menus is now displayed. The options

included in the select menu vary according to the model type

you have chosen. The following illustration shows an overview

of the model menus for fixed-wing model aircraft.

In this Section we discuss those options which not yet been

analysed. To guide us through the possible functions we will

take a fully equipped model glider as the basis for the Model

menu. This means that the options specific to power models

are not covered; they are discussed in the following section.

Aileron diff. = Differential aileron travel

Flap settings = Wing flap adjustments

Ail. -> flap = Aileron -> camber-changing flap mixer

Ail. -> brake flap = Aileron -> brake flap

Aileron -> rudder = Aileron -> rudder mixer

Airbrake -> elevator = Airbrake ? elevator mixer

Rudder -> aileron = Rudder -> aileron mixer

Spoiler = Camber-changing flap mixer

Elevator -> spoiler = Elevator -> flap mixer

Flap -> elevator = Flap -> elevator mixer

Butterfly = Butterfly (crow) mixer

Trim Mix 1 and 2 = Trim mixers 1 and 2

Gyro = Gyro settings

V-tail = V-tail mixer

Ailvator = Divided elevators with aileron function

Winglet = Winglet mixer for flying wing models

Motor = Settings for electric motors

Rudder -> elevator = Rudder -> elevator mixer

Snap roll = Snap roll

Multi motor = Pre-sets for models with two or more

motors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info