Bedienungsanleitung Robbe Futaba FX-40 (Seite 67 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Model menu

Wing flap settings

FX-40

This screen shot shows aileron differential programmed to

50%.

• Select the ‘fine-tuning’ settings

It is possible to program a transmitter control to be used for

fine adjustments to the aileron dif

ferential settings (fine-

tuning); changes are carried out in the ‘Fine-tuning’ frame.

Mark the appropriate field and select your preferred trans-

mitter control in the transmitter control / switch select menu

which then appears.

The current curve for the fine-tuning option is also dis-

played on-screen.

18.2 WING FLAP SETTINGS

This menu is

used for ente-

ring the set-

tings for all the

inboar

d wing

flaps. If your

model featur

two pairs of

inboard flaps

(see diagram

above) this menu applies to the inboard brake flaps and spoi-

ler flaps, which are located adjacent to each other. The up and

down travel of each control surface can be set individually at

this point, while an Offset function allows you to fine-tune the

travels. As with many functions, it is also possible to determine

whether the settings are to apply to all flight modes (Glob) or

only to the currently activated flight mode (Sepa). If you wish,

you can program a mixer which causes the spoilers to be

deployed when the brake flaps are operated.

Mark the ‘Flap settings’ option in the Model menu. The screen

display now looks like this:

You can adjust the travel individually for each control surface

and each direction of movement, using the method already

described repeatedly in this manual. The same applies to the

Offset function; the value is simply entered as a percentage

using the arrow buttons.

The adjustment range for up-travel and down-travel is -120%

to +120% for both control surfaces; the default setting is

100%. The software automatically corrects the prefix for the

second wing flap if you reverse the prefix when programming

the travel of a paired control surface.

The effects and methods of setting the ‘Glob’ or ‘Sepa’ modes

have already been described; a corresponding button field is

assigned to each frame.

The brake flap mixer (BrFl -> flap) causes the spoiler flaps to

follow the movement when the brake flaps are deployed. The

mixer must first be activated in the ‘Status’ line, as already

described. ‘OFF’ or ‘ON’ will now be displayed in the corres-

ponding field, according to the position of the assigned

switch.

You can now select the appropriate switch fields and set the

mode of the flight modes in the time-honoured way; you can

also assign a switch, set the degree of following for each

direction of travel separately, and program an Offset.

Brake

flap

(BRK2)

Spoiler

(FLAP2)

Spoiler

(FLAP)

Brake

flap

(BRK1)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info