Bedienungsanleitung Robbe Futaba FX-40 (Seite 81 von 105) (Englisch)

520094

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Model menu

Motor

FX-40

‘Speed 1’ and ‘Speed 2’. This facility includes the option of

setting different delay times for each direction of switching

(‘there’ and ‘back’). Simply mark the appropriate field, then

use the arrow buttons to set the desired value. The range is 0

to 27 increments, with the maximum figure corresponding to a

delay of nine seconds. The default is no switch-over delay (0

increments).

The screen shot shows a sensible programming set-up for this

option.

The screen shot below shows typical programmed settings for

the ‘Motor off’ option.

Ensure that the ‘Motor off’ settings coincide with the Fail-Safe

settings for the motor control system.

If the motor switch is in the ‘On’ position when you switch the

transmitter on, a visual and audible warning signal is triggered

in the interests of safety. Operate the motor switch to reset

(switch off) the alarm.

18.17 MOTOR SETTINGS

This menu is used for entering the settings for switching an

electric motor on and off, and is of particular inter

est for con-

trolling the electric motor in a hot-line model using a simple

switch. It is possible to program two different motor speeds for

slow and fast flight (Speed 1 / Speed 2). In this case you will

need to assign a three-position switch to the function.

It is important to check that the propeller fitted to the motor is

capable of absorbing the loads, especially for the ‘Speed 2’

setting. A ‘Once mode’ is provided; when this option is selec-

ted, the settings can only be changed within the menu.

This menu is only available if you have selected an electric-

powered model (Motor glider) as model type in the Base menu.

Once you have done that, mark the ‘Motor’ option in the Model

menu. The screen now looks like this:

The first step is to activate this mixer function in the Status line.

Mark the field, and the same field then displays ‘ON’ or ‘OFF’

instead of ‘INA’ (inactive), according to the position of the

switch.

The effects and method of setting the ‘Glob’ or ‘Sepa’ mode

have already been described; the function is programmed using

the appropriate switch field.

A switch can be defined to trigger the mixer, using the standard

procedure: mark the appropriate field and define the desired

switch and its direction of operation in the switch select menu

which then appears. The default setting is ‘NONE’, which

means that the mixer is permanently switched on.

Move to the ‘Motor off’ line, where you can define the switch

position at which the motor is to be switched off. Mark the field

and move the switch to the ‘OFF’ position, then confirm the

security query with ‘Yes’. The setting is now stored, and is dis-

played in the field as a percentage value.

The speed settings are entered In a separate frame; this sub-

menu must again be activated in the Status line initially. You can

then decide whether to activate ‘Once mode’. The setting is

selected using exactly the same procedure as for activating a

mixer.

The next step is to define the speed limits, i.e. the ranges for the

two motor speeds. Mark the appropriate field, and use the

arrow buttons to set the values you require. The adjustment

range is -100% to +100%; the default setting is 0%. The setting

is displayed in graphic bar form on the screen, and as a per-

centage value in the field.

The last task is to define the transition rate for switching bet-

ween the speed settings; this is carried out separately for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robbe Futaba FX-40 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robbe Futaba FX-40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info