467096
17
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
17
<Before Use>
The T12FG transmitter model data can be stored
by using an SD card on the market. When T12FG
transmitter software update software is released,
the software is updated using an SD card. (SD card
memory size: 32MB to 1GB)
Caution
Be sure to turn off the power to the transmitter
before inserting or removing the SD card.
As the SD card is a precision device, do not use
excessive force when inserting.
Restrictions when using an SD card
The following restrictions apply when using an
SD card:
,WPD\¿UVWEHQHFHVVDU\WRLQLWLDOL]HWKH6'FDUGLQ7)*
dedicated format. The SD card cannot be used as is
immediately after purchase.
*Initializing destroys all the data previously saved on the
card.
*An SD card formatted by the T12FG cannot be written
directly from a PC by explorer, etc. The files must be
converted and written by special conversion software. Files
are identified by number instead by name. (The special
conversion software can be downloaded from Futaba dealer
web site.)
Inserting/removing the SD card
1. Turn off the transmitter power and then
open the battery cover at the rear of the
transmitter.
2.
Ɣ6'&DUG
[Inserting the card]
Turn the SD card so that the front of the card
faces the bottom of the transmitter and slide
the card into the card slot.
*Push in the card until it is locked.
[Removing the card]
When the SD card is pushed, it is pushed out
and can be removed.
3. Close the battery cover.
SD card initialization
To use an SD card with the T12FG, the card
must first be formatted. Once formatted, the card
does not have to be reformatted. Formatting is
performed by the T12FG.
[IMPORTANT] When an SD card is formatted,
all the existing data is destroyed. Do not
format a card containing important data.
[Formatting procedure]
1. Insert the SD card into the SD card slot of the
T12FG.
2. Turn on the T12FG power. When an
unformatted card is inserted into the T12FG,
the screen shown below appears.
3. If the T12G is ready to format, move the
cursor to [FORMAT] and push the EDIT button.
SD Card (Secure Digital memory card) (Not included)
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Robbe Futaba T-12 FG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Robbe Futaba T-12 FG

Robbe Futaba T-12 FG Bedienungsanleitung - Deutsch - 78 seiten

Robbe Futaba T-12 FG Bedienungsanleitung - Holländisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info