Bedienungsanleitung Roberts Radio Colourstream (Seite 88 von 100) (Englisch)

613002

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

You can view the radio’s MAC address using the menu items 'Settings'

-> 'Network settings' -> 'Current Network settings' -> 'MAC address'.

The MAC address will typically be of the form

00:22:61:xx:xx:xx

5. If you have an encrypted network, check that you have entered the

correct encryption key into the radio. Remember that text-format WPA

keys are case sensitive. If your radio displays 'Network error' when

attempting to connect to an encrypted network, then please ensure

that you enter the correct key for the network. If the problem persists,

then you may need to re-check your network conﬁ guration.

6. If you need to set up your radio's IP address manually, you will need to

know low-level details of your network's conﬁ guration. Use the menu

items 'Settings' > 'Network settings' > 'Manual settings' -> 'Wired' or

'Wireless' (as needed) -> 'DHCP No'.

The radio will then prompt you in turn for the

Ethernet IP address

Ethernet Subnet mask

Ethernet Gateway address

Ethernet Primary DNS

Ethernet Secondary DNS

If you are setting up a wireless connection manually you will also need

to enter the SSID, the encryption type, and the encryption key.

See page 18 for full details on how to set up your radio's network

conﬁ guration manually.

Troubleshooting

If you experience any trouble with your radio, then you may ﬁ nd it useful

to visit the help section on our web site at

http://www.robertsradio.co.uk/pages/colourstream_faq.htm

If you have difﬁ culty connecting the radio to your computer network, some

of these steps may help to resolve the problem:

1. Conﬁ rm that a WiFi connected PC can access the Internet (i.e. can

browse the web) using the same network.

2. Check that a DHCP server is available (normally a router function).

Your radio will by default use DHCP unless you choose to disable it.

This may be conﬁ gured using the menu items 'Settings' > 'Network

settings' -> 'Manual settings'. This will ask ﬁ rst whether you wish to

conﬁ gure a wired or a wireless connection. For either wired or wireless

you then need to choose 'DHCP Yes' or 'DHCP No'. If you enable

DHCP then the radio will negotiate with your router (or DHCP server)

and will be provided with an IP address as well as the other settings

needed. If you wish to set the network conﬁ guration manually, refer

to paragraph 6.

3. Check that your network’s ﬁ rewall is not blocking any outgoing ports.

As a minimum, the radio needs access to UDP and TCP ports 80

and 123. Port 53 may be required for DNS. Some Internet radio

services may require additional ports to be open. Windows Media

Player 11 or 12 will allocate a port number for UPnP media sharing

and will conﬁ gure Microsoft's Windows built-in ﬁ rewall appropriately.

Other ﬁ rewall software may require conﬁ guration for UPnP or to allow

particular IP addresses to have trusted access.

4. Check that your access point does not restrict connections to particular

MAC addresses (sometimes called MAC address ﬁ ltering).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roberts Radio Colourstream Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roberts Radio Colourstream

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info