Ring guard fence option (fig. 22 )
Warning: the use of a ring guard fence is obligatory when curved workpieces have to be
machined. The ring guard fence is made for tools with a maximum diameter of 120 -150-mm
and a spindle diameter of 30 mm.
fig.22
Ring guard fence adjustments (fig. 23)
Normally the workpiece is machined with the tool mounted underneath the guiding template.
Before starting, check that the workpiece travel will not be blocked by any handle.
The wood is guided along the straight part of the template. The cutting depth is progressive,
with a maximum on the index of the template (that index is visible through the horizontal
pusher). The wood guide, connected to the fence, replaces the template when calibrating with
a bearing. The operator is obliged to use this guide which is delivered with the fence. It is thus
advisable to adjust the horizontal woodpusher height using the wood as a guide and to put it
as far to the front as possible.
- Adjust the ring guard fence in height in relation to the position of the tool and thickness of
the workpiece. Fix with the Allen key.
- Adjust the woodpusher protection in the horizontal and vertical direction in relation to the
thickness of the wood and the diameter of the tool (a slight pressure of the pusher on the
wood is needed). Lock well the 2 wingnuts and all locking knobs and bolts before starting the
work.
fig.23
Fence mountin
knob
Locking knob
Cutting depth adjustment
Horizontal pusher
Guiding when using bearing
Cutting depth adjustment knob
Guiding template
Guiding template when using a
ball bearing guide instead of the
normal template
Vertical and horizontal woodpusher-
protection
