Bedienungsanleitung Robomow RL serie (Seite 14 von 84) (Englisch)

512470

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Chapter 1-2

Robomow RL555, RL855, RL2000

1.1.3 Determine location of Power Supply

P The Base Station should be close enough (15 m/50 ft) to

a wall electrical socket (230V / 120V). The indoor Power

Supply unit will be connected to it.

P Robomow’s 15 m (50 ft) low voltage cable connects

to the power supply unit. The length of the low voltage

cable must NOT be changed.

P Select the right location for the power supply unit:

The power supply is suitable for indoor use only. Choose a

sheltered, dry, well ventilated spot.

It should NOT be exposed to direct sunlight or rain.

1.2 Planning the Perimeter Wire’s layout

The Perimeter Wire functions as an “invisible wall” for Robomow. It sets

the boundaries of lawn zones and it surrounds specific areas where you

do not want Robomow to enter.

The Perimeter wire is held to the ground with small pegs, supplied with

Robomow. Soon after setting, the wire will become invisible under the

growth of new grass.

As soon as Robomow starts operating, it turns on a signal that runs along

the Perimeter Wire. This signal keeps Robomow within its working zones

and away from preset demarcated areas.

1.2.1 Is your lawn a single contiguous area?

If grass areas are contiguous, Robomow

will automatically mow all zones tracking the

Perimeter Wire you set around the lawn.

1.2.2 Does your lawn have more than one zone?

If your lawn areas are separated by fences,

sidewalks or other objects, you may wish to

set Robomow to work in more than one zone.

Create separate zones in more than one way:

P You may use one Perimeter Switch or one

Base Station































: Connect all zones

together in one long loop of the Perimeter Wire.

The Perimeter wire can be as long as 500

meters (1650 ft) in one loop

P You may set both Base Station































and a

Perimeter Switch: Connect one or more zones

to the Base Station. In addition, connect other

zones to a Perimeter Switch available as an

accessory for RL2000.

The Perimeter Switch may be moved from one

zone to another.

To switch zones, Robomow will be driven or

carried to the proper location.





























































Indoor power supply

fixed to the wall

Max

15 m (50 ft)

The Fence

should be

inside lawn

15 m (50 ft) extension

cord (low voltage)

Indoor use only

Base

Zone

Zone A

Zone B

Maximum length of

wire connected to the

Base Station in one

loop is 500 m (1650 ft)

While the picture shows two wires

separate, they should be adjacent

Base

Station

Base

Station

Min 1 m

(3 ft)

>1.5 m

(4.9 ft)

Perimeter Switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow RL serie Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow RL serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info