2.3 Separated Zone(s)
If the lawn has one or more zones that are separated and if the mower cannot
drive from one zone to the other, an additional setting is required.
In such cases, the mower will have to be driven or carried between the zones.
A minimum of 1 m (3.3 ft.) must be kept between the wires of the
Separated Zone and the Main Zone.
2.3.1 Setup for a Separated Zone that can
be completely mowed in a single
operation
P If possible, the separated area may be
connected to the main area’s Perimeter
Wire.
) No special accessories are
needed.
P If the areas cannot be connected to the
Perimeter Wire of the Main Zone.
) The Separated Zone will have its
own Perimeter Wire.
) The Perimeter Wire will be connected to an additional Perimeter
Switch (Optional accessory).
) Install the Perimeter Switch according to instructions boxed with the
Perimeter Switch accessory.
) Set a Perimeter Wire in the Separated
Zone.
2.3.2 Setup for a Separated Zone that
requires more than a single operation
to completely mow the area.
P Additional separate Station, including a
Power Box (optional accessories) are
required for this installation.
P Install the station according to
instructions boxed with the separate
Base Station.
P Set a Perimeter Wire in the Separated
Zone.
