Bedienungsanleitung Roland AT100 (Seite 127 von 148) (Englisch)

527335

127

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

125

Troubleshooting

Appendices

Troubleshooting

If the ATELIER does not function in the way you except, first check the following chart. If this does not

resolve the problem, consult your dealer or a nearby Roland Service Station.

Problem

Check Solution Page

When you press the [Power On]

switch, the power doesn’t come on

Power cord is not connected correctly. Connect the power cord correctly.

p. 16

Nothing appears on screen

The ATELIER uses a liquid-crystal

screen, so text may not be displayed

when the ambient temperature is

below freezing.

This is not a malfunction.

- - -

It appears as though there are

vertical stripes in the screen

This is due to the nature of a liquid

crystal display, and is not a

malfunction.

This is not a malfunction.

- - -

The device connected to the Input

jack is not loud enough

Could you be using a connection cable

that contains a resistor?

Use a connection cable that does not

contain a resistor.

- - -

The volume level of the instrument

connected to ATELIER is too low.

Could you be using a connection cable

that contains a resistor?

Use a connection cable that does not

contain a resistor.

p. 121

Can’t read/write USB memory

Could you be using USB memory not

made by Roland?

We cannot guarantee operation if

you’re using USB memory not made by

Roland.

- - -

Noise is heard in the sound

If there is a cell phone nearby, you

may hear noise from the ATELIER when

an incoming call or outgoing call

occurs, or during a conversation.

Keep the cell phone as far away as

possible, or turn off its power.

- - -

No sound is heard

The [Master Volume] knob is set too

low.

Turn the [Master Volume] knob toward

“Max.”

p. 18

Headphones are connected.

When you connect the headphones,

the sound is heard only through the

headphones.

If you want sound to be output from the

speakers, disconnect the headphones.

p. 18

The plug is still plugged into the

headphone jack.

Disconnect the plug from the

headphone jack.

p. 18

The volume is set too low on the Level

[

▲

] or [

▼

] button.

Press the Level [

▲

] or [

▼

] button to

raise the volume.

p. 36

The volume is set too low on the

Expression Pedal.

Advance the expression pedal.

p. 71

You do not have a Voice selected.

Voices that have their button indicator

lit can be played.

Press a voice button to select a voice.

p. 27

No sound is heard

(by the Lower keyboard)

Drums/SFX are selected for the Lower

keyboard, but you are playing a key to

which no drum sound is assigned.

Turn the Drums/SFX off or play keys to

which drums sounds are assigned.

p. 38

No sound is heard (when external

devices are connected)

The power of the connected external

devices is not turned on.

Use the correct procedure to turn on

the power of the connected external

devices.

p. 121

–

p. 124

AT-100-300_e.book 125 ページ２００８年５月７日　水曜日　午後３時３３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT100 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info