Bedienungsanleitung Roland AX-Edge (Seite 11 von 22) (Englisch)

708898

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

If you want to save the setting, execute the System Write

operation.

“Saving the System Settings (System Write)” (p. 20)

* You can assign a function other than [HOLD] to this button. For details

on how to assign a function to this button, refer to “Assigning the

Function of Each Controller” (p. 12).

Layering the Same Tone to Thicken the

Sound (Unison)

If you turn “Unison” on, the sound is thickened by layering an

identical but slightly pitch-shifted tone onto the tone of part 1.

Unison turns on/off each time you press the [UNISON] button.

MEMO

The depth of the effect differs depending on the settings of the tone

that’s selected.

Turning unison on only while you hold down the button

Here’s how to make the unison function turn on only while you hold

down the [UNISON] button. When you release the button, unison

turns off.

Press the [MENU/WRITE] button.

Use the cursor [

] [

] buttons to select “SYSTEM,” and

then press the [ENTER] button.

Use the cursor [

] [

] buttons to select “S3 (M),” and use

the [–] [+] buttons to change the value to “MOMENTARY.”

If you want to save the setting, execute the System Write

operation.

“Saving the System Settings (System Write)” (p. 20)

* You can assign a function other than [UNISON] to this button. For

details on how to assign a function to this button, refer to “Assigning

the Function of Each Controller” (p. 12).

Preventing the Sound from Changing

During Performance (Lock)

You can disable some of the AX-Edge’s buttons to prevent the

sound from being inadvertently switched if you press a button

accidentally.

Hold down the [LOCK] button until it is lit.

The lock function turns on, and the buttons other than in the

neck control section are disabled.

To return to the normal state, once again hold down the [LOCK]

button until it is unlit.

MEMO

The lock function does not apply to the buttons of the neck control

section.

The lock function is valid only in the top screen (the program select

screen).

Modifying the Sound While You

Perform

The AX-Edge lets you use various controllers to modify the sound

while you perform.

Using the MODULATION BAR

Press the MODULATION BAR to apply modulation.

* The effect applied by the MODULATION BAR differs depending on the

setting. Normally, pressing the MODULATION BAR applies a vibrato

effect. To change the setting, refer to “Assigning the Function of Each

Controller” (p. 12).

Using the RIBBON CONTROLLER

You can modify the sound by pressing your finger on the RIBBON

CONTROLLER and moving it to left or right. For this controller, the

sound also changes according to the pressure of your finger.

* The effect applied by the RIBBON CONTROLLER differs depending

on the setting. Normally, left/right motion operates as pitch bend to

change the pitch. Pressure on the controller applies a vibrato-type

effect. To change the setting, refer to “Assigning the Function of Each

Controller” (p. 12).

Disabling the RIBBON CONTROLLER

You can disable the AX-Edge’s RIBBON CONTROLLER operations if

you like. This is convenient when you want to apply an effect only in

response to left/right movement or only in response to pressure.

Press the [MENU/WRITE] button.

Use the cursor [

] [

] buttons to select “SYSTEM,” and

then press the [ENTER] button.

Use the cursor [

] [

] buttons to select a parameter, and

use the [–] [+] buttons to change the value.

[SHIFT] + cursor [K] [J]

Parameter

Cursor [K] [J]

Value

[–] [+]

CTRL RIBBON

Posi (Position)

OFF: Left/right operation

is disabled.

Pres (Pressure)

OFF: Pressure operation is

disabled.

Various other settings are also available.

For details, refer to “Parameter Guide” (PDF).

MEMO

If you want to save the setting, execute the System Write operation.

“Saving the System Settings (System Write)” (p. 20)

Depending on the settings of the program, operation might not be

disabled even if you change the system settings. For details, refer to

the parameter guide.

Owner’s Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AX-Edge Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AX-Edge

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info