Bedienungsanleitung Roland AX-Edge (Seite 12 von 22) (Englisch)

708898

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Using the Control Buttons and Knob

([S1]–[S7] Buttons / [ASSIGNABLE CONTROL] Knob)

You can assign various parameters to the control buttons ([S1]–[S7]

buttons) and the [ASSIGNABLE CONTROL] knob of the neck

control section, and use them to modify the sound.

S1 S2 S3

[ASSIGNABLE CONTROL] knob

For each control button and knob, you can specify what happens

when the controller is operated. For details, refer to “Assigning the

Function of Each Controller” (p. 12).

MEMO

The knob value does not automatically return to its original state, so if

you don’t want to apply the effect, return the knob to “0.”

Using a Pedal

You can assign various parameters to a pedal switch or expression

pedal connected to the PEDAL jack, and use the switch or pedal to

modify the sound or control a function.

The effect controlled by the pedal differs depending on the setting.

You can specify the effect of operating a pedal switch or expression

pedal. For details, refer to “Assigning the Function of Each

Controller” (p. 12).

Modifying the Sound by Applying

Further Pressure to the Key (Aftertouch)

The keyboard of the AX-Edge is equipped with an aftertouch sensor.

You can modify the sound by applying pressure to the keyboard.

The effect applied by aftertouch differs depending on the tone

parameter setting.

This needs to be specified using the “AX-Edge Editor” software.

For details, refer to “AX-Edge Editor’s manual.”

Assigning the Function of Each

Controller

You can change the parameters that are controlled by the [S1]–[S7]

buttons, MODULATION BAR, RIBBON CONTROLLER, control

knob, and pedal.

Press the [MENU/WRITE] button.

Use the cursor [

] [

] button to select “SYSTEM,” and then

press the [ENTER] button.

Use the cursor [

] [

] buttons to select a parameter, and

use the [–] [+] buttons to change its value.

Parameter

Cursor [K] [J]

Value

[–] [+]

CTRL BUTTON

S1 (F) –S7 (F)

Specify the parameters that are assigned

to the [S1]–[S7] buttons.

S1 (M) –S7

(M)

Specify the operating mode of the [S1]–

[S7] buttons.

MOMENTARY: The function is on only

while you hold down the button.

LATCH: The function turns on/off each

time you press the button.

CTRL KNOB

Func