2. Impor
6
In addition to the items listed under
Po
• Do not connect this unit to same electrical outlet
that is being used by an electrical appliance that
is controlled by an in
refrigerator
air conditioner). Depending on the way in which
the electrical appliance is used, power supply noise
may cause this unit to malfunction or may produce
audible noise. If it is not practical to use a separate
electrical outlet, connect a power supply noise lter
between this unit and the electrical outlet.
• The AC adaptor will begin t
long hours of consecutive use.
not a cause for concern.
• T
always make sure to turn o the po
equipment before y
• With the factory settings, the BK-3 will
automatically be switched o 30 minutes after you
stop playing or operating the unit. If you don
the unit to turn o automatically
OFF”
NOTE
The settings you wer
unit is turned o. If you wan
you must save y
unit o.
Placement
• Using the unit near power ampliers (or other
equipment containing large pow
may induce hum.
the orientation of this unit; or move it farther away
from the source of int
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of
such receivers
• Noise may be produced if wireless c
devices, such as cell phones, ar
vicinity of this unit. Such noise could occur when
receiving or initiating a call, or while c
Should you experience such problems
relocate such wireless devic
greater distance fr
• Do not expose the unit to direct sunlight, place
it near devices that radiate heat, lea
an enclosed vehicle, or otherwise subject it to
temperature extremes
or discolor the unit.
• When moved from one loca
the temperature and/or humidity is very dierent,
water droplets (condensation) ma
the unit. Damage or malfunction may result if you
attempt to use the unit in this condition.
before using the unit, y
for several hours
completely evaporated
• Do not allow objects to remain on top of the
keyboard.
such as keys ceasing to produce sound
• Depending on the material and temperature of the
surface on which you place the unit, its rubber feet
may discolor or mar the surface.
Y
rubber feet to prev
do so, please make sure tha
move accidentally
• Do not put anything that contains wat
unit. Also, a
alcohol, nail polish, spray cans
Swiftly wipe away any liquid that spills on the unit
using a dry, soft cloth.
Maintenance
• For ev
dry cloth or one that has been slightly dampened
with water
impregnated with a mild
Afterwards, be sure to wipe the unit thoroughly
with a soft, dry cloth.
• Never use benzine, thinners, alc
any kind, to avoid the possibility of discolora
and/or deformation.
Additional Pr
• Unfortunately
contents of data that was st
once it has been lost. Roland Europe assumes no
liability concerning such loss of data.
• Use a reasonable amount of care when using the
unit’
using its jacks and connectors. Rough handling can
lead to malfunctions.
• Never strike or apply strong pressur
• When disconnecting all cables, grasp the connector
itself—never pull on the cable.
avoid causing shorts, or damage to the cable
internal elements.
• T
unit’
to use headphones, so you do not need to be
concerned about those around you
• When you need to transport the unit, package it
in the box (including padding) that it came in, if
possible. Otherwise, you will need to use equivalent
packaging materials.
• Do not apply undue force to the music stand while
it is in use.
Storage devic
to the BK-3’
• The BK-3 allow
available USB Flash memory
such devices at a computer stor
dealer
• Though external hard disks with a capacity in
excess of 2TB can be used, please bear in mind tha
the BK-3 can manage a maximum of 2TB. (F
formatted storage devic
• Use USB memory sold by Roland (M-UF-series).
We cannot guar
memory is used.
Before using external USB stor
devices
• Carefully insert the USB memory all the way in—
until it is rmly in place.
• USB memories are constructed using precision
components; handle the storage devices car
paying particular note to the following.
• T
static electricity, be sure to dischar
electricity from your own body before handling
the cards.
• Do not touch or allow metal to come into
contact with the contact portion of the USB
memory.
• Do not bend, drop
shock or vibration.
• Do not keep cards in direct sunlight, in closed
vehicles, or other such locations
• Do not allow USB memories to become wet.
• Do not disassemble or modify the USB memory.
• Never touch the terminals of the USB memory. Also
avoid getting the terminals dirty.
• When connecting a USB memory, position it
horizontally with the BK-3’
and insert it without using excessive forc
USB MEMORY port may be damaged if you use
excessive f
• Do not connect or disconnect a USB drive while it
is being rear from, or written to (i.e
ash access indicator blinks).
• Do not insert anything other than a USB memor
(e.g., wir
MEMORY port. Doing so will damage the BK-3’
MEMORY port.
• Never connect your USB memory to the BK-3 via a
USB hub.
• Do not connect or disconnect a USB drive while it
is being rear from, or written to (i.e
ash access indicator blinks).
Liability and copyright
• Recording, duplication, distribution, sale
performance, or broadcast of copyrighted mat
(musical works, visual works, br
performances, etc.) belonging to a third party in
part or in whole without the permission of the
copyright owner is forbidden b
• Do not use this unit for purposes that could
infringe on a copyright held by a third party. Roland
assumes no responsibility whatsoever with regard
to any infringements of third-party copyrights
arising through your use of this unit.
• Company names and product names mentioned
in this document are trademarks or regist
trademarks of their respective owners.
• MPEG Layer-3 audio compr
is licensed from F
THOMSON Multimedia Corporation.
• Copyright © 2003 by Bitstream, Inc. A
reserved. Bitstream
Inc.
• MMP (Moore Microprocessor P
patent portfolio concerned with microproc
architecture, which was dev
Properties Limited (
technology from the
