Bedienungsanleitung Roland BK-5 (Seite 60 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Lock functions

Backing Keyboard BK-5

15. Lock functions

The BK-5 allows you to lock (protect) several settings to ensure that they no longer change when you select a different

Performance memory.

The BK-5’s locks are data filters that allow you to use

your Performance memories more efficiently, because

you can ignore settings that may be fine for one song

(the one you prepared the Performance memory for),

but not for another.

Here is an example: Suppose you select a Performance

memory that assigns the “French Horns” sound to the

Upper1 part, which you want to keep for the entire song

(or set). In this case lock (i.e. protect) the Upper1 part

after selecting this memory to ensure that subsequent

Performance memories you recall modify all of the

BK-5’s eligible settings—except the Upper1 part (which

goes on using the “French Horns” sound).

All settings that can be protected are indicated by

means of the legend “Hold to LOCK”.

NOTE

The “Performance Hold” settings are linked to these buttons

and therefore adopt the on/off status you select on the BK-5’s

front panel.

NOTE

Unlike the other lock parameters, the protection of the tempo

setting (see [MENU] button‰ “Performance Edit”‰ “Arranger

Setting” ‰ “Tempo”, page 69) also applies to rhythm selection.

Each rhythm has a preset tempo value that is recalled when

you select it. While the tempo setting is locked, the tempo no

longer changes when you select a different rhythm.

NOTE

The “Save Global” parameter (page 76) also saves the lock (and

hence the “Performance Hold”) settings.

Whenever you switch a lock function on or off, the dis-

play briefly informs you about this:

The lock status of the functions that provide this protec-

tion is also displayed on the main page:

Switching the locks on and off

In the example shown here, you will learn how to

exclude rhythm changes from Performance selections.

The same procedure (albeit with different buttons) also

applies to the tempo (press and hold [TAP TEMPO]) and

“Key” (press and hold [KEY]) settings as well as to Tone

selection (for each of the real-time parts individually).

Connect the USB memory and load a Perfor-

mance memory (page 48) or a rhythm

(page 32).

Press and hold one of the RHYTHM FAMILY

buttons.

A “Rhythm” pop-up window appears with a closed

lock (see left). (If you repeat step (2), the pop-up win-

dow will display an open lock to inform you that the

lock function has been cancelled.)

Start playback of the selected rhythm.

Select a different Performance memory.

If the lock next to “RHYTHM” on the main page is

closed, recalling another Performance does not

change the rhythm.

Again press and hold any RHYTHM FAMILY

button to unlock the “RHYTHM” function.

The Upper1 part no longer changes

Tones.

The Upper1 part will change Tones

when you select a different Perfor-

mance memory.

BK-5_US.book Page 60 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info