Bedienungsanleitung Roland BK-5 (Seite 62 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

Backing Keyboard BK-5

The internal display now shows the lyrics of the

selected song (4 lines at a time) and the chords of the

song (only for SMF files).

At the end of the song, press and hold the

[EXIT] button to return to the main page.

NOTE

The internal display always shows four lines of lyrics and

the chord symbols (this cannot be changed).

External Lyrics

This is, in fact, a switch that allows you to cancel (“Off”)

or activate (“On”) the display of song lyrics on an exter-

nal screen.

‘Performance Edit’ parameters

The following parameters can be set for each Perfor-

mance memory:

‘Tone Part View’ parameters

This function group can be selected using [MENU] but-

ton ‰ “Performance Edit” ‰ “Tone Part View”.

Use the [CURSOR÷VALUE] dial and [ENTER/

SELECT] button to select the keyboard part

you want to edit (LWR, UP2, UP1).

The display shows the settings for the selected key-

board part.

Use the dial to select and set the desired

parameter(s).

The following parameters are available:

Tone

Allows you to select a different Tone. See page 129

for a list of available Tones and Drum Sets. While

selecting a Tone, you can press a Tone selection but-

ton to select a different family.

Volume

Adjusts the volume of the selected keyboard part.

Selecting “0” means that the part is question is no

longer audible.

Reverb Send

Use this parameter to set the reverb send level (i.e.

the amount of effect that should be added).

Chorus Send

Use this parameter to set the chorus send level (i.e.

the amount of effect that should be added).

Parameter/Group Explanation

Tone Part View This is where you can edit settings

related to Tones. See page 62.

Tone Part MFX Contains the effects parameters for the

keyboard parts (LWR, UP2, UP1). See

page 66.

Rhythm Parts This group contains all parameters of the

rhythm parts. See page 67.

Split This parameter allows you to change the

split point, i.e. the separation between

the lower and upper keyboard zones. See

page 67.

Key Allows you to transpose the BK-5 in

semi-tone steps up or down. See

page 44.

Arranger Setting This function group allows you to specify

where and how the selected rhythm

should scan the note messages gener-

ated by your playing for chord informa-

tion. See page 68.

Melody Intelligent Allows you to set the “Melody Intelli-

gence” function. See page 70. This page

can also be selected by pressing and

holding the [MELODY INTELL] button.

Save As Default This function allows you to save all “Per-

formance Edit” settings as the new

defaults that will be loaded each time

you switch on the BK-5.

Parameter Explanation

Tone The number of Tones depends on the

selected family.

Parameter Setting

Volume 0~127

Parameter Setting

Reverb Send 0~127

Parameter Setting

Chorus Send 0~127

Parameter/Group Explanation

BK-5_US.book Page 62 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info