Bedienungsanleitung Roland BK-5 (Seite 84 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

Backing Keyboard BK-5

Mfx Type

Allows you to select the desired Mfx type, i.e. the kind

of effect you need. Each Mfx (“A” and “B”) can be

assigned to as many instruments as you like. Be

aware, however, that selecting a different type will

affect all instruments that use this Mfx processor. See

page 66 for a list of the available Mfx types.

NOTE

Each Mfx can be assigned to as many instruments as you

like. Be aware, however, that selecting a different type will

affect all instruments that use this Mfx processor.

NOTE

While the “Mfx” parameter is set to “Off”, you cannot select

a different type. In that case, the display will show the

message “---”.

Mfx Edit

If you also want to edit the parameters of the

selected effect type, press the [ENTER/SELECT] button

to jump to the “Mfx Edit” page. You can then edit the

available parameters.

Equalizer

Activate this setting if you want to change the timbre

of the selected instrument.

Edit EQ

To edit the equalizer parameters, press the [ENTER/

SELECT] button to jump to the “Edit EQ” page. You

can then edit the available parameters:

Drum Instrument (D)

If you want to edit the settings for specific instru-

ments of the selected Drum Set, press the [ENTER/

SELECT] button to jump to the “Drum Instrument”

page.

All instruments of the Drum Set being used are dis-

played. Use the [CURSOR÷VALUE] dial to select the

instrument you want to change, then press the

[ENTER/SELECT] button.

You can then use the [CURSOR÷VALUE] dial and the

[ENTER/SELECT] button to edit the available parame-

ters.

Parameter Setting

Equalizer Off, On

Parameter Setting Explanation

Equalizer Off, On Activate this setting if

you want to change

the timbre of the

selected instrument.

This parameter dupli-

cates the “Equalizer”

above and was added

for your convenience.

High Freq 1500 Hz, 2000

Hz, 3000 Hz,

4000 Hz, 6000

Hz, 8000 Hz,

12000 Hz

Allows you to set the

cutoff frequency of

the high band (this is a

shelving filter).

High Gain –15~+15 dB Use this parameter to

set the level of the

selected “High” fre-

quency. Positive val-

ues boost (increase the

volume of) that fre-

quency, negative val-

ues cut (attenuate) it.

Mid Freq 200~8000 Hz Allows you to set the

cutoff frequency of

the middle band (this is

a peaking filter).

Mid Q 0.5, 1, 2, 4, 8 Use this parameter to

specify the width of

the “Mid Freq” band

that you want to boost

or cut. Smaller values

mean that neighboring

frequencies above/

below that value are

also affected.

Mid Gain –15~1+5 dB Use this parameter to

set the level of the

selected “Mid Freq”.

Positive values boost

(increase the volume

of) that frequency,

negative values cut

(attenuate) it.

Low Freq 90 Hz, 150 Hz,

180 Hz, 300

Hz, 360 Hz,

600 Hz

Allows you to set the

cutoff frequency of

the low band (this is a

shelving filter).

Low Gain –15~+15 dB Use this parameter to

set the level of the

selected “Low” fre-

quency.

Parameter Setting Explanation

Instr. All Drum Set

Instruments

Select the drum instru-

ment you want to edit.

Parameters for the selected instrument

Mute Off, On Suppress (or add) the

selected instrument.

Parameter Setting Explanation

BK-5_US.book Page 84 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info