Bedienungsanleitung Roland BK-5 (Seite 85 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Makeup Tools (rhythms and SMF)

Backing Keyboard BK-5

If you are satisfied with your changes and

wish to preserve them, save your rhythm/

song to the USB memory.

See “Saving your new rhythm or song (SMF) version”

on p. 86.

NOTE

The changes you make using the procedure described

above can be “burned” into the rhythm/song file using the

“Freeze Data” command (see p. 85). Doing so will allow you

to hear those changes on any sequencer (software) you

use. Changes you don’t “freeze” are nevertheless stored

when you save the edited rhythm/song file—but only the

BK-5 can read them.

Freeze Data

To commit your settings, use [MENU] button ‰ “Makeup

Tools” ‰ “Freeze Data”.

Before saving your “made-up” song to a USB memory,

you can (but you don’t have to) “commit” your changes,

thereby turning them into “regular” rhythm or song

data.

This may come in handy if you also want to play back

your new rhythm/song version on another arranger

instrument, sequencer or your computer. This operation

is unnecessary for files you only want to use with the

BK-5 or one of the models mentioned above.

Solo Off, On Switch off all instru-

ments except the

selected instrument.

Volume -127~+127 Use this parameter to

set the volume of the

selected drum instru-

ment.

Reverb -127~+127 Use this parameter to

set the reverb send

level of the selected

drum instrument. The

effect itself can be

changed on the “Com-

mon” page.

Chorus -127~+127 Use this parameter to

set the chorus send

level of the selected

drum instrument. The

effect itself can be

changed on the “Com-

mon” page.

Panpot -127~+127 Use this parameter to

set the stereo place-

ment of the selected

drum instrument. “0”

means “no change”,

negative values shift

the instrument

towards the left and

positive values shift it

towards the right.

Velocity -127~+127 This parameter allows

you to modify the

velocity range of the

drum instrument in

question. “0” means

that the recorded val-

ues are left untouched,

a negative setting

reduces all velocity

values by the same

amount (leaving varia-

tions intact). A posi-

tive setting shifts all

velocity values in a

positive direction.

Pitch -127~+127 Use this parameter to

tune the selected drum

instrument higher or

lower. “0” means that

the pitch is left

unchanged.

Parameter Setting Explanation

Instr. Equalizer Global, Instr,

Off

Global: The drum

instrument uses the

equalizer settings of

the Drum Set it

belongs to.

Instr: The drum instru-

ment uses its own

equalizer settings (see

below).

Off: The drum instru-

ment is not equalized.

Edit EQ (Press the

[ENTER/

SELECT] but-

ton)

Provides access to the

EQ parameters of the

currently selected

drum instrument (if

“Instr. Equalizer” is set

to “Int”). See “Edit EQ”

on p. 84 for a descrip-

tion of the available

parameters.

Undo Changes (Press the

[ENTER/

SELECT] but-

ton)

This function allows

you to cancel the

“Drum Instrument (D)”

settings of the cur-

rently selected instru-

ment and to revert to

the previously saved

version.

Parameter Setting Explanation

BK-5_US.book Page 85 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info