Bedienungsanleitung Roland BK-5 (Seite 100 von 160) (Englisch)

708951

100

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

100

Backing Keyboard BK-5

■ Change Velo

The “Change Velo” function allows you to modify the

dynamics (called “velocity”) of a track or excerpt. Only

note events can be changed.

Press the [WRITE] button (its indicator flashes) to

confirm your settings and edit the data.

■ Change Gate Time

This function allows you to modify the duration of

the notes in the selected time (“From”/“To”) and note

(“From Note”/“To Note”) ranges. We recommend you

only use this function to shorten notes that suddenly

seem too long when you assign a different sound to

the track in question. You cannot view the duration

of the notes here, which makes editing the data “en

bloc” a little bit hazardous. See “Editing individual

rhythm events (Micro Edit)” on p. 104 for how to

change the duration of individual notes.

After selecting a sound with a slow release (i.e. a

sound that lingers on after all notes have been

released), however, “Change Gate Time” will help you

Parameter Setting Explanation

Track ADrums~Acc6,

ALL

Allows you to select

the track you wish to

edit. You can also

select “ALL” here, in

which case the opera-

tion applies to all

tracks.

Mode Major, Minor,

7th

Allows you to select

the Mode to be edited.

Division Intro 1~4,

Main 1~4, Fill

Dwn 1~3, Fill

Up 1~3, End

1~4

Use this parameter to

select the Division you

want to edit.

From Bar~

To CPT

See page 94.

Bias* –99~99) Allows you to specify

by how much the

velocity values should

change. Select a posi-

tive value to increase

the velocity (the value

is added to the velocity

value of the affected

notes) or a negative

value to decrease the

velocity values (that

value is subtracted).

Select “0” if you prefer

to work with the

“Magnify” parameter

(see below).

Magnify** 0~200% This parameter works

like a “Compander”

effect (a dynamics pro-

cessor that simulta-

neously acts as

compressor and

expander), although it

processes MIDI data:

by selecting a value

above “100%” you

increase the differ-

ences between high

and low velocity values

in the selected range.

Values below “64” are

lowered, while values

above “64” are

increased. The result is

therefore that the dif-

ference between pia-

nissimo and fortissimo

becomes far more pro-

nounced.

From Note/

To Note

0 C-~127 G9 “From Note” refers to

the lower limit of the

note range you want

to change. “To Note”

represents the upper

limit.

[*] Even the highest positive or negative value doesn’t allow you

to go beyond “1” or “127”. There is a reason why “0” is impossi-

ble: that value is used to indicate the end of a note (note-off).

“127”, on the other hand, is the highest velocity value the MIDI

standard can muster. Adding a high positive velocity value may

thus lead to all notes being played at “127”.

[**] “Magnify” values below “100%” have the opposite effect:

they push all velocity towards the imaginary center of “64”, thus

reducing differences in playing dynamics.

Parameter Setting Explanation

BK-5_US.book Page 100 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info