Bedienungsanleitung Roland BK-5 (Seite 101 von 160) (Englisch)

708951

101

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Rhythm Composer (programming your own rhythms)

Backing Keyboard BK-5

101

cut the notes down to size and thus avoid undesir-

able overlaps.

Press the [WRITE] button (its indicator flashes) to

confirm your settings and edit the data.

■ Global Change

This function allows you to make quick changes to

certain settings. The changes always apply to entire

tracks (you cannot use “Global Change” for just a few

measures). You can apply global changes to the four

editable rhythms track parameters (“Express”,

“Reverb”, “Panpot” and “Chorus”) when you notice

that the effect is too prominent or not strong

enough.

You can also use it to “upgrade” older rhythms to

ensure that they use the BK-5’s new sounds.

Parameter Setting Explanation

Track ADrums~Acc6,

ALL

Allows you to select

the track you wish to

edit. You can also

select “ALL” here, in

which case the opera-

tion applies to all

tracks.

Mode Major, Minor,

7th

Allows you to select

the Mode to be edited.

Division Intro 1~4,

Main 1~4, Fill

Dwn 1~3, Fill

Up 1~3, End

1~4

Use this parameter to

select the Division you

want to edit.

From Bar~

To CPT

See page 94.

Bias –1920~1920 This parameter sets the

amount by which the

duration (or gate time)

of the selected notes is

to change. The shortest

possible “Gate Time”

value is “1” (used for all

drum notes), so that

selecting “–1000” for

notes with a “Gate

Time” value of “1” in

the specified time

range still leaves you

with the same value.

Magnify 0~200% Use this parameter

rather than “Bias” to

produce proportional

changes to the

affected “Gate Time”

values. Values below

“100%” decrease the

duration, while any-

thing above “100%”

increases it. Select

“100%” if you prefer to

work with the “Bias”

parameter (see above).

From Note/

To Note

0 C-~127 G9 “From Note” refers to

the lower limit of the

note range you want

to change. “To Note”

represents the upper

limit.

Parameter Setting Explanation

Track ADrums~Acc6,

ALL

Allows you to select

the track you wish to

edit. You can also

select “ALL” here, in

which case the opera-

tion applies to all

tracks.

Mode Major, Minor,

7th, ALL

Allows you to select

the Mode to be edited.

Division Intro 1~4,

IntroALL,

Main 1~4,

Fill Dwn 1~3,

Fill Up 1~3,

End 1~4, ALL

Use this parameter to

select the Division you

want to edit.

Alteration

Mode*

Nearest,

Degree, —

This message type is

only available for

melodic rhythm tracks

(i.e. not for ADrums or

ABass tracks). Rhythm

tracks you only just

recorded do not con-

tain it. See also “About

‘Alteration Mode’ mes-

sages” on p. 106.

Parameter Setting Explanation

BK-5_US.book Page 101 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info