Bedienungsanleitung Roland BK-5 (Seite 104 von 160) (Englisch)

708951

104

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

104

Backing Keyboard BK-5

■ Time Signature

The “Time Signature” parameter allows you to check

and set the time signature of the patterns. The major,

minor and seventh Modes of a pattern must always

use the same time signature, which is why you can-

not edit them separately.

Use this parameter to specify the time signature of

the selected pattern (“Division”, see below). The

MAIN, INTRO and ENDING instances comprise four

variations, which is why there are four “Time Signa-

tures” values you can select using the VARIATION

[1]~[4] button icons. When you select “Fill Up” or “Fill

Dwn” for “Division”, only three “Time Signature”

instances can be edited.

The most commonly used time signatures are: 2/4, 3/

4, 4/4, 6/8 and 12/8. Other values (such as 7/4, 13/8,

etc.) are also possible.

NOTE

When you change the time signature of an already

recorded pattern, its notes and events are “reshuffled”, so

that you may end up with incomplete measures. None of

your data are deleted, however.

Press the [WRITE] button (its indicator flashes) to

confirm your settings and edit the data.

Editing individual rhythm events

(Micro Edit)

Select this mode if you need to change just one aspect

of an otherwise perfect rhythm.

In this section, we will use the word “event” for any kind

of message. An event is thus a command (or instruction)

for the Arranger.

You can only view and edit one track at a time. There-

fore, be sure to check the “Track” setting before editing

the events displayed on this page.

Return to the main Rhythm Composer page.

Use the “Track”, “Mode” and “Division”

parameters to select the pattern you want

to edit.

Press the [MENU] button (its indicator

flashes).

The display changes to:

Use the [CURSOR÷VALUE] dial to select

“Micro Edit”, then press the [ENTER/SELECT]

button.

The display changes to:

You can use the [CURSOR÷VALUE] dial and [ENTER/

SELECT] button to edit the available functions.

NOTE

This page doesn’t allow you to select a different rhythm

pattern (“ADrum – Major – Intro1” in our example). Be sure

to select the correct button before calling up the “Micro

Edit” page (see step (2) above).

Parameter Setting Explanation

Division Intro, Main,

FillDwn, FillUp,

End, ALL

Use this parameter to

select the Division you

want to edit.

Time Signature 1/16~32/2 This parameter allows

you to set the time sig-

nature.

Variation 1, 2, 3,

On, Off Use these parameters

to select the pattern

you want to change. If

you set “Division” to

“Fill Dwn” or “Fill Up”,

there are only three

button icons. You can

switch on several or all

button icons if you like.

(But you cannot switch

off all four or three.)

BK-5_US.book Page 104 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info