Bedienungsanleitung Roland BK-5 (Seite 106 von 160) (Englisch)

708951

106

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

106

Backing Keyboard BK-5

■About the ‘Note’ messages

As stated above, note messages comprise a note

number, a velocity value and a Gate Time value.

The range for note numbers is “0 (C–)”~“127 (G9)”.

Velocity messages can be set anywhere between “1”

(extremely soft) and “127”. The value “0” cannot be

entered, because it would effectively switch off the

note.

This message type is only available for melodic

rhythm tracks (i.e. not for ADrums or ABass tracks)

and needs to be inserted by hand (using “Create

Event”). Rhythm tracks you only just recorded do not

contain it.

It allows you to use a revolutionary system for adapt-

ing the recorded notes to a more natural behavior

(also known as “voicing”). There are two options:

● Degree—This setting refers to the “old” system for

real-time conversion of rhythm track information for

Arranger playback. Based on the fundamentals of the

chords you play during Arranger playback, it often

leads to odd jumps of certain parts.

● Nearest—Refers to a more musical system for

real-time shifts of the recorded rhythm notes during

Arranger playback. Let us first look at an illustration:

This new system is called “Adaptive Chord Voicing”.

The notes of the melodic rhythm tracks are compared

against the chords played in the recognition area. If

the next chord you play contains the note the

selected part is already sounding (based on the previ-

ous chord), that note is maintained.

If the new chord does not contain that note, the

rhythm part in question uses the closest (“Nearest”)

note. In the example above, the “G” is closer to the

“A” sounded by the strings part than the “C”. This

produces a more musical behavior than any other

system on the market.

Both “Degree” and “Nearest” allow you to specify the

note range (“Limit Low” and “Limit High”) the

selected part may play. Notes that would fall outside

that range during Arranger playback are automati-

cally transposed to values inside the selected range.

Rather than specifying two note values, you can also

choose “Std”, which means that the BK-5 decides

automatically when extremely high (or low) notes

need to be shifted down (or up) by one or several

octaves.

Other edit operations

The “Micro Edit” page allows you to select several func-

tions.

You can select several consecutive events and edit

them in one go: select the first event of a series, press

and hold the [ENTER/SELECT] button and rotate the

[CURSOR÷VALUE] dial.

Select the event you want to edit.

Press the [MENU] button (its indicator

flashes).

The display changes to:

The top line shows the event type that can be edited

(“CC00 Bank MSB” in our example) and its location

(“001:01:000”). You cannot change the event type on

this page.

If you selected several events (see above), the display

looks as follows:

Use the [CURSOR÷VALUE] dial to select the

desired edit function, then press the

[ENTER/SELECT] button.

About ‘Alteration Mode’ messages

Recorded strings track

Chords played in the recognition area.

Result with “Degree”

Result with “Nearest”

BK-5_US.book Page 106 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info