Bedienungsanleitung Roland BK-5 (Seite 107 von 160) (Englisch)

708951

107

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Editing individual rhythm events (Micro Edit)

Backing Keyboard BK-5

107

■Create Event

Select this function to add a new event to the

selected track.

If the position for which you create a new event

already contains other events, the new event is added

at the end of that group.

The selected event is inserted with a default value:

Obviously, you will then need to change the default

settings depending on the result you want to

achieve.

Press the [WRITE] button to confirm your settings

and add the new event. The BK-5 returns to the

“Micro Edit” page.

■Erase Event

This function allows you to remove one or several

events without changing the positions of the

remaining events.

Use the [CURSOR÷VALUE] dial to select the

event you want to delete.

The selected event is displayed at the center of the

display page.

NOTE

To select several consecutive events, press the [ENTER/

SELECT] button while rotating the [CURSOR÷VALUE] dial

towards the left (upward direction) or the right (downward

direction).

Press the [ENTER/SELECT] button icon to

remove the event you selected.

The BK-5 returns to the “Micro Edit” page.

■Move Event

This function allows you to move one or several

events.

Select the event you want to move.

Select the “Move Event” function.

Set “To Bar”, “To Beat” and “To CPT”.

NOTE

If the position to which you move the selected event

already contains other events, the moved event is added at

the end of that group.

NOTE

Events located at “1-01-00” cannot be moved further to

the left.

Press the [WRITE] button to confirm your

settings and move the event.

The BK-5 returns to the “Micro Edit” page.

■Copy Event

This function allows you to copy one or several

events. Use “Place Event” to insert a copy of those

events at the desired position.

Select the event you want to copy.

To select several consecutive events, press and hold

the [ENTER/SELECT] button while rotating the

[CURSOR÷VALUE] dial towards the left (upward direc-

tion) or the right (downward direction).

All events selected in this way appear on a gray back-

ground.

Select the “Copy Event” function.

Press the [ENTER/SELECT] button.

Each new selection will replace the previous one.

Use the“Place Event” function to specify

where you want to insert the copied

event(s).

Parameter Setting Explanation

Event Note, Control

Change, Pro-

gram Change,

Pitch Bend,

Alteration

Mode

Allows you to specify

the event type you

want to add.

To Bar,

To Beat,

To CPT

See page 94. Specifies the position

where your new event

will be inserted.

Note: Note Number: 60 C4

On Velocity: 100

Gate Time: 60

Program Change: CC00 Bank Select MSB, value “0”

CC32 Bank Select LSB, value “4”

Program Change Number “1”

(The bank select messages are added

automatically: you don’t have to

worry about that.)

Pitch Bend: “0”

Alteration Mode: Nearest

Limit Low: Std

Limit High: Std

Parameter Setting Explanation

To Bar,

To Beat,

To CPT

See page 94. Specifies the position

to which the first

event (in chronologi-

cal order) of the

selected group should

be shifted.

BK-5_US.book Page 107 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info