Bedienungsanleitung Roland BK-5 (Seite 110 von 160) (Englisch)

708951

110

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

110

Backing Keyboard BK-5

Select “On” if you want the selected part to receive

MIDI data.

Rx Ch

Allows you to assign a MIDI receive channel to the

selected part.

Rx Shift

This parameter allows you to transpose the note

messages received from an external MIDI instrument

or computer. The maximum possible transposition is

four octaves up (+48) or down (–48). Each step repre-

sents a semi-tone.

Rx Limit Low/Limit High

“Limit Low” and “Limit High” allow you to set the

note range to be received. If not all note messages

received on a given MIDI channel should be played by

the selected BK-5 part, narrow down the range.

NOTE

The “Limit Low” value cannot be higher than the “Limit

High” value (and vice versa).

Rx Event

The “Rx Event” section provides a number of filters

that allow you to specify whether the messages in

question should be received (On) or not (Off).

Pitch Bender Off, On Select “On” to transmit

Pitch Bend messages.

Modulation Off, On Select “On” to transmit

Modulation messages

(CC01).

Volume Off, On Select “On” to transmit Vol-

ume messages (CC07).

Panpot Off, On Select “On” to transmit

Panpot messages (CC10).

Expression Off, On Select “On” to transmit

Expression messages

(CC11).

Reverb Off, On Select “On” to transmit

Reverb messages (CC91).

Chorus Off, On Select “On” to transmit

Chorus messages (CC93).

Select All Off, On Select “On” to transmit all

MIDI message listed above.

Parameter Setting

Rx Off, On

Parameter Setting

Rx Ch 1~16

Parameter Setting

Rx Shift –48~0~+48

Parameter Setting

Rx Limit Low C–~G9

Rx Limit High C–~G9

Filter Setting Explanation

Program

Change

Off, On Select “On” to receive pro-

gram change and bank

select (CC00, CC32) mes-

sages.

Pitch Bender Off, On Select “On” to receive Pitch

Bend messages.

Modulation Off, On Select “On” to receive Mod-

ulation messages (CC01).

Volume Off, On Select “On” to receive Vol-

ume messages (CC07).

Panpot Off, On Select “On” to receive Pan-

pot messages (CC10).

Expression Off, On Select “On” to receive

Expression messages

(CC11).

Reverb Off, On Select “On” to receive

Reverb messages (CC91).

Chorus Off, On Select “On” to receive Cho-

rus messages (CC93).

Hold Off, On Select “On” to receive Hold

messages (CC64).

Sostenuto Off, On Select “On” to receive Sos-

tenuto messages (CC66).

Soft Off, On Select “On” to receive Soft

messages (CC67).

Caf Off, On Select “On” to receive Caf-

Channel aftertouch.

RPN Off, On Select “On” to receive Reg-

istered parameter number

messages (CC100/101).

NRPN Off, On Select “On” to receive Non-

registered parameter num-

ber messages (CC98/99).

System

Exclusive

Off, On Select “On” to receive Sys-

tem Exclusive messages.

CC16 Off, On General purpose controller

that allows you to influence

the “C1” parameter (see

p. 66). Select “On” to receive

this message type.

Select All Off, On Select “On” to receive all

MIDI message listed above.

BK-5_US.book Page 110 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info