708951
112
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
Menu options
112
r
Backing Keyboard BK-5
Sync
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Sync”.
The “Sync” parameters allow you to specify whether
or not the BK-5 should send MIDI real-time messages
when you start rhythm or song playback. This allows
you to synchronize external instruments or (soft-
ware) sequencers with your BK-5.
Rhythm Start/Stop Tx
If you activate this option, the BK-5 sends start or
stop messages when you start (or stop) rhythm play-
back.
Rhythm Clock Tx
If you activate this option the rhythm playback sends
MIDI Clock messages.
SMF Start/Stop Tx
Similar to “Rhythm Start/Stop Tx” but for songs.
SMF Clock Tx
Similar to “Rhythm Clock Tx” but for songs.
SMF Position Tx
If you switch this parameter on, the song playback
sends Song Position Pointer (SPP) messages that
indicate the current playback position.
Sync Rx
This parameter is used to specify whether rhythm
and song playback should be synchronized by an
external MIDI device.
Mode
Internal: Song or rhythm playback uses BK-5 inter-
nal tempo.
Auto: A good setting for remote control of song or
rhythm playback (using a PK-series dynamic MIDI
pedal board, for example). If the BK-5 receives a MIDI
Start message (FA), it waits for Clock messages that
specify the tempo. If those Clock messages are not
received, the BK-5 starts playback using its internal
tempo. If, however, Clock messages (F8) follow after
the Start message, the BK-5 uses the external tempo.
MIDI: Song or rhythm playback can be started or
stopped with MIDI real-time messages (Start, Stop,
Clock) received from an external clock source.
Remote: Song or rhythm playback waits for a start
message to start playback at its own tempo. When it
receives a stop message, playback stops. External
clock messages are ignored.
Basic
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Basic”.
The Basic channel is used to receive and transmit
Program Change and Bank Select messages for
selecting Performances, as well as for the reception
and transmission of other kinds of messages that are
not directly related to a specific MIDI channel.
NOTE
If you select another channel, messages intended for the
Basic parameters might also cause other parameters to
change when you don’t want them to.
The following parameters are available here:
Tx
Switches the transmission of MIDI messages on the
Basic channel on or off.
Tx Channel
The channel used to transmit MIDI messages.
Parameter Setting
Rhythm Start/Stop Tx Off, On
Parameter Setting
Rhythm Clock Tx Off, On
Parameter Setting
SMF Start/Stop Tx Off, On
Parameter Setting
SMF Clock Tx Off, On
Parameter Setting
SMF Position Tx Off, On
Parameter Setting
Sync Rx Off, On
Parameter Setting
Mode Internal, Auto, MIDI, Remote
Parameter Setting
Tx Off, On
Parameter Setting
Tx Channel 1~16
BK-5_US.book Page 112 Thursday, May 23, 2013 7:01 PM
112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland BK-5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland BK-5

Roland BK-5 Bedienungsanleitung - Deutsch - 147 seiten

Roland BK-5 Zusatzinformation - Englisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info