708951
114
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
Menu options
114
r
Backing Keyboard BK-5
Rhythm Volume Rx
Allows you to enable or disable the reception of vol-
ume messages relating the rhythm.
Rhythm Pc Rx
This parameter allows you to enable or disable the
reception of program change and bank select mes-
sages for rhythm selection.
NTA
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “NTA”.
NTA notes are only received (from an external MIDI
instrument). What you play in the chord recognition
area of the keyboard to feed the Arranger is auto-
matically converted to the corresponding MIDI note
numbers, so that all rhythm parts transmit their
notes to external instruments. There is thus no need
to transmit the note messages of what you play in
the chord recognition area (NTA) separately.
These parameters allow you to specify on which MIDI
channels the BK-5 should receive chord information
used to change the rhythm’s key in real-time.
Channel
Allows you to select the MIDI channel on which the
BK-5 should receive NTA messages.
Rx
This parameter allows you to specify whether (“On”)
or not (“Off”) the selected MIDI channel should be
used to receive chord information.
Rx Octave
Use this parameter to transpose the notes received
on the selected MIDI channel (“Ch”) in steps of one
octave.
Rx Global Limit Low/High
These parameters allow you to set the note range to
be received. If not all note messages of the selected
MIDI channel should be received by the NTA “part”,
set the range to the desired values.
NOTE
The “Limit Low” value cannot be higher than the “Limit
High” value (and vice versa).
Parameters
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Parameters”.
This page contains several parameters that are not
related to one another (the other MIDI pages always
concentrate on one aspect).
Part Switch
This parameter allows you to specify whether or not a
muted part should go on sending MIDI messages:
Internal: A muted part can no longer be played via
the BK-5’s keyboard or Arranger/song player but con-
tinues to send MIDI messages. Selecting “Internal”
and muting a part thus has the same effect as select-
ing “Local Off” (see p. 108).
Int+MIDI: A muted part can no longer be played via
the BK-5’s keyboard or Arranger/song player and no
longer sends MIDI messages.
Tx Velocity
Your BK-5 is equipped with a velocity-sensitive key-
board and a tone generator capable of responding to
velocity messages. Use this parameter to switch the
transmission (TX) of velocity messages on or off.
Parameter Setting
Rhythm Volume Rx Off, On
Parameter Setting
Rhythm Pc Rx Off, On
Parameter Setting
Channel Ch1~Ch16
Parameter Setting
Rx Off, On
Parameter Setting
Rx Octave –4~0~4
Parameter Setting
Rx Global Limit Low C–~G9
Rx Global Limit High C–~G9
Parameter Setting
Part Switch Internal, Int+MIDI
BK-5_US.book Page 114 Thursday, May 23, 2013 7:01 PM
114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland BK-5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland BK-5

Roland BK-5 Bedienungsanleitung - Deutsch - 147 seiten

Roland BK-5 Zusatzinformation - Englisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info